Note: Vehicles with push button start: Briefly
press the button.
3. Start the engine.
Vehicles With a Diesel Engine
Note: Engine cranking will not commence
until the engine glow plug indicator has
extinguished. This may take several seconds
in extremely cold conditions.
Stopping the Engine When Your
Vehicle is Moving - Vehicles With
Push Button Start
1. Press and hold the button for at least
one second or press it three times within
two seconds.
2. Move the transmission selector lever to
position N and use the brakes to bring
your vehicle to a safe stop.
3. When your vehicle has stopped, move
the transmission selector lever to
position P or N and switch the ignition
off.
AUTO-START-STOP
Using Start-Stop
Note: The system is on by default. To switch
the system off, press the switch in the
instrument panel. The system will only be
switched off for the current ignition cycle. To
turn it on, press the switch again.
To stop the engine
1. Stop your vehicle.
2. Move the gear lever to the neutral
position.
3. Release the clutch pedal.
4. Release the accelerator pedal.
The system may not shut down the engine
under certain conditions, for example:
• To maintain the interior climate.
• Low battery voltage.
• The outside temperature is too low or
too high.
• The driver's door has been opened.
• Low engine operating temperature.
• Low brake system vacuum.
• If a road speed of 3 mph (5 km/h) has
not been exceeded.
• The driver's safety belt has not been
fastened.
To re-start the engine
Note: The gear lever must be in the neutral
position.
Depress the clutch pedal.
The system may automatically restart the
engine under certain conditions, for
example:
• Low battery voltage.
• To maintain the interior climate.
REFUELING
1. Press the flap to open it. Open the flap
fully until it engages.
10
B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 03-05-2015, CG3574en enGBR, Edition date: 02/2014, Second Printing
