Manual Foppapedretti Supertres (page 14 of 144) (English, German, Dutch, French, Italian, Portuguese, Spanish)

768984

Zoom out

Zoom in

1/144

SuperTres 14

ASSEMBLY

Important note: the images and instructions contained in this handbook refer to one version of the

stroller; some components and functions described herein may vary according to the version of the

stroller you have purchased.

INSTALL FRONT WHEELS (g.1, g.2, g.3, g.4, g.5)

Insert the end bushing into the front legs until it is completely locked. Ensure the correct assembly.

Insert the end bushing into the slot situated in the center of the wheel block

Press the button down front wheel blocked. Raise the lock lever to activate the swivel function.

Press the steel button front wheel released (g.5).

INSTALL REAR WHEELS (g.6, g.7, g.8, g.9, g.10)

Assemble the rear wheels along the arrow direction.

Insert the rear wheel group into the end of the tubes of the rear legs. The wheel supports are

correctly assembled when the metal pins are locked in the corresponding holes on the tubes of the

chassis (g.9).

Press the button situated on the center of wheel and pull it to take the wheel apart from the axle

(g.10).

UNFOLD THE STROLLER (g.11, g.12, g.13)

Press the folding lock button and then lift up the handlebar to open the folding lock.

Step on the lever, and then lift up the handlebar until the stroller is unfolded.

Make sure the pushchair has been opened correctly.

PARKING BRAKE (g.14)

To apply the brake: Press the brake lever, push the pushchair forward gently to ensure the brake

has been applied correctly.

To release the brake: Lift the brake lever as shown.

ADJUSTING THE HANDLEBAR (g.15)

Press both buttons “A” side handle and rotate the handle to the desired position.

FITTING THE BUMPER BAR (g.16, g.17, g.18, g.19, g.20)

Assembly: Align the bumper bar and insert it in its seat on both sides, a click will indicate the

correct assembly.

Disassembly: Push the release button “A” on each side of the bumper bar and contemporary lift

the bar upwards to hook it off (g.18).

Unhook the bumper bar on only one side : Push the release button “A” on one side of the bumper

bar and contemporary lift the bar upwards to open it as a gate.

Push the buttons “A” on both sides, to adjust the height of the bumper bar (g.20).

INSTALL THE SEAT (g.21, g.22, g.23, g.24)

Align the seat with the adaptors and press until “click” sound.

Lift up the buttons of the adaptors with one nger at each side and lift up the seat to remove the

seat.

ADJUSTING THE CANOPY

Extend the hood according to requirements to protect baby from the sun.

Note: babies’ skin is very delicate. NEVER leave baby under direct sunlight. Always make sure that

the hood has been adjusted correctly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Foppapedretti Supertres in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Foppapedretti Supertres Manual

Product: