768999
5
Zoom out
Zoom in
Previous page
1/32
Next page
CO-SLEEPING MODE (FIXED TO THE BED)
It is possible to attach the crib to the parents’ bed
(Co-Sleeping Mode).
CAUTION – IMPORTANT FOR YOUR CHILD
SAFETY: This mode is only allowed with bed types
that allow you to comply with all the following
conditions:
IMPORTANT: The reclined crib side must always be
placed next to the parents’ mattress and the bed’s
mattress must be aligned with (or at least higher
than) the height of the reclined crib side (see figure).
When in the “Co-Sleeping Mode”, the crib must
always be attached to the parents’ bed frame with
the supplied strap, fixed as per the instructions.
CAUTION: Check that the crib frame in “Co-Sleeping
Mode” is not interfering with the parents’ bed.
CAUTION: During use, make sure that sheets,
blankets, etc. do not fall inside the crib.
CAUTION: Do not use when the child is able to sit,
kneel or stand up.
IMPORTANT: The crib must be adjusted to the same
height on both legs.
IMPORTANT: Place the crib against the longest side
of the adult bed.
The process of fixing the crib to the bed and the
various adjustments must be carried out by an adult.
In the “Co-Sleeping Mode”, the crib must be fixed
to the adult bed.
Place the crib next to the bed, adjust the height of
the crib so that the mattress is aligned with, or at
least higher than, the level of the reclined side.
Lift up the bed mattress, place the strap locking
plate on the opposite side.
Attach the two buckles to the crib. Tighten the
strap to securely anchor the crib in contact with the
mattress of the adult bed.
IMPORTANT: There must be no gap between the
crib and the adult bed.
Before each use, check that the crib is attached
by pulling it away from the adult bed. Tighten the
anchoring strap if necessary.
DO NOT use the product if there is a gap between the
crib and the adult bed. Do not fill any gap between
the crib and the adult bed with cushions, blankets or
other objects as they may cause suffocation.
Keep the anchoring straps out of the reach of
children.
MATTRESS - EN 16890:2017
The dimension shall take into account that there
shall be no gap more than 30 mm between the
mattress and the sides end ends in any position of
the mattress.
Do not use the product if any part is broken, torn or
missing and use only spare parts approved by the
manufacturer.
WARNING – Do not use more than one mattress in
the crib (crib or suspended cradle).
WARNING – To avoid a fire risk, never place the
product near electric heaters, gas stoves or other
sources of strong heat (crib or suspended cradle).
Mattress dimensions: 842x480x50 mm.
Suitable for cribs with maximum internal dimensions
of 872x510 mm.
WASHING
EN - warning
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foppapedretti Mamma and me at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foppapedretti Mamma and me in the language / languages: English, German, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 7,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info