768955

Foppapedretti Festival Manual

12
Zoom out
Zoom in
Previous page
1/128
Next page
FESTIVAL 12
ASSEMBLY
GB
Important note: the images and instructions contained in this handbook refer to one version of the stroller;
some components and functions described herein may vary according to the version of the stroller you have
purchased.
UNFOLD THE STROLLER (g.1, g.2)
Press the folding lock button and then lift up the handlebar to open the folding lock.
Step on the lever, and then lift up the handlebar until the stroller is unfolded.
Make sure the pushchair has been opened correctly.
INSTALL REAR WHEELS (g.3, g.4, g.5, g.6, g.7)
Insert the rear wheel group into the end of the tubes of the rear legs.
The wheel supports are correctly assembled when the metal pins are locked in the corresponding holes on
the tubes of the chassis.
Assemble the rear wheels along the arrow direction.
Press the button situated on the center of wheel and pull it to take the wheel apart from the axle.
INSTALL FRONT WHEELS (g.8. g.9, g.10)
Insert the end bushing into the slot situated in the center of the wheel block.
Press the button down front wheel blocked. Raise the lock lever to activate the swivel function.
Press the steel button front wheel released.
PARKING BRAKE (g.11)
To apply the brake: Press the brake lever, push the pushchair forward gently to ensure the brake has been
applied correctly.
To release the brake: Lift the brake lever as shown.
ADJUSTING THE HANDLEBAR (g.12)
Press both buttons “A” side handle and rotate the handle to the desired position.
FITTING THE BUMPER BAR (g.13, g.14, g.15, g.16, g.17)
Assembly: Align the bumper bar and insert it in its seat on both sides, a click will indicate the correct assembly.
Disassembly: Push the release button “A” on each side of the bumper bar and contemporary lift the bar
upwards to hook it off.
Unhook the bumper bar on only one side : Push the release button “A” on one side of the bumper bar and
contemporary lift the bar upwards to open it as a gate.
Push the buttons “A” on both sides, to adjust the height of the bumper bar.
ADJUST THE FOOTREST (g.18)
Press buttons “A” and adjust the footrest in the required position.
INSTALL THE SEAT (g.19, g.20, g.21, g.22, g.23)
Align the seat with the adaptors and press until “click” sound.
Lift up the buttons of the adaptors with one nger at each side and lift up the seat to remove the seat.
REVERSIBLE SEAT (g.24, g.25, g.26)
Lift buttons “A” on both sides and remove the seat by lifting it.
Position the seat so that it is forward facing or parent-facing.
Replace the seat on the chassis of the pushchair, see the paragraph “INSTALL THE SEAT” for correct
assembly.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foppapedretti Festival at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foppapedretti Festival in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info