769007
3
Zoom out
Zoom in
Previous page
1/16
Next page
• Check the box contents.
To avoid damaging the cot during
assembly, please remove all the
packaging materials on a clean, at
surface.
• ATTENTION! Assembly must be
performed by an adult only.
• IMPORTANT: To assemble the cot
correctly, carry out the assembly
operations in the indicated order.
Incorrect assembly operations could
make the cot unsafe.
• WARNING: Be aware of the risk of open
re and other sources of strong heat,
such as electric bar res, gas res, etc.
in the near vicinity of the cot.
• WARNING! Do not use the cot if any
part is broken, torn or missing and
use only spare parts approved by the
manufacturer.
• WARNING! Do not leave anything in the
cot or place the cot close to another
product, which could provide a foothold
or present a danger of suffocation
or strangulation, e.g. strings, blind/
curtain cords, etc..
• WARNING! Do not place more than one
mattress in the cot.
The product is ready for use only when
all locking mechanisms are engaged.
Make sure they are securely engaged
before use.
Remove the holder when the cot base is
in the lowest position.
The lowest position is the safest and
that the base should always be used in
that position as soon as the baby is old
enough to sit up.
If you leave the child unattended in the
cot, always make sure that the movable
side is closed.
Important when choosing cot mattress;
There has to be at least a 500 mm
distance between the upper surface of
the mattress and the upper border of
the bed sides (highest position in case
of adjustable bedside heights) when the
cot base is xed in its lowest position.
There has to be at least a 200 mm
distance between the upper surface of
the mattress and the upper border of
the bed sides (highest position in case
of adjustable bedside heights) when the
cot base is xed in its highest position.
This cot requires a 124x63 cm mattress.
Maximum mattress thickness: 12 cm.
The dimension shall take into account
that there shall be no gap more than
30 mm between the mattress and the
sides end ends in any position of the
mattress.
Periodically check that the screws are
tightened correctly.
Should any screws be loose, tighten
them to avoid the risk that any object
(necklaces, clothes, etc.) could
remain entangled and pose a risk of
strangulation.
In order to prevent falls, when baby can
climb out of the cot, stop using the cot
itself.
Use only spare parts supplied or
authorized by the manufacturer.
Correct use and maintenance will make
the cot durable and safe over time.
Clean with a damp cloth or neutral
detergent (NO SOLVENTS) and allow to
dry in the air.
Avvertenze Warning Avvertissement Advertências Advertencias Προειδοποιήσεις
EN_IMPORTANT, RETAIN FOR FUTURE
REFERNCE: READ CAREFULLY.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foppapedretti 450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foppapedretti 450 in the language / languages: English, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 12,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info