610571

FoodSaver Jar Sealer Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
Note: FoodSaver Jar Sealers can only be used with a FoodSaver
®
appliance that has an Accessory Port.
Please check your QuickStart Guide to see if your machine has one.
1. Place the FoodSaver
®
appliance on a flat, dry surface and plug the power cord into a standard
electrical outlet.
2. Place the item(s) to be vacuum packaged inside the Mason jar. Leave at least one inch (1”) between
the contents and the rim of the jar.
3. Wipe the rim to ensure it is clean and dry.
4. Place the Mason jar lid on the top of the Mason jar. (You will not need the screw band section of the
Mason jar lid. It is not used when vacuum packaging.) Push down firmly until the Jar Sealer covers the
entire rim of the jar.
5. Insert one end of the Accessory Hose into the Accessory Port on the FoodSaver
®
appliance.
6. Insert the other end of the Accessory Hose into the hole at the top of the Jar Sealer. Twist the gray tip
of the hose while inserting to ensure a tight fit.
5. Follow the steps for vacuum packaging as outlined in your QuickStart Guide.
Remember to remove the Accessory Hose from the Accessory Port on the appliance before vacuum
packaging in FoodSaver
®
Bags. Remove the hose by gently twisting the gray fitting while pulling it out.
How to Open a Mason Jar
To open a Mason jar, wedge a spoon between the Mason jar lid and the highest part of the threaded
rim. Twist the spoon gently to release the vacuum. When opened this way, the Mason jar lid can be
reused many times.
Care and Cleaning Instructions
1. FoodSaver
®
Jar Sealers should be washed in warm water using a mild dishwashing soap. Jar Sealers
are not dishwasher safe.
2. Dry thoroughly before using.
3. FoodSaver
®
Jar Sealers may not be washed in the dishwasher.
Troubleshooting
If the Mason jar will not vacuum.
1. Make sure the Jar Sealer is centered and pressed firmly over the lid of the Mason jar.
2. Make sure the rubber gasket on the Mason jar lid is free from food materials, crumbs, etc.
3. Make sure the rim of the Mason jar does not have any cracks or scratches. Any gaps can prevent a
vacuum from forming.
4. Make sure the Mason jar is not too full for vacuum packaging. Always leave at least one inch (1”)
between the contents and the lid.
5. Make sure the metal lid of the Mason jar is not bent.
6. Make sure the Accessory Hose is securely inserted into the Accessory Port on the appliance and in the
hole on the Jar Sealer.
Note: To avoid accidents, do not use a knife to remove the Mason jar lid. Also, do not use a bottle opener
to remove the Mason jar lid as it will bend the lid and prevent its reuse. Vacuum packaging is not a
substitute for canning.
If you need assistance:
In the U.S., call Consumer Services at 1-877-777-8042 or email customerservice@foodsaver.com.
In Canada, call 1-877-804-5383.
How to Vacuum Package Using the FoodSaver
®
Jar Sealer with Mason Jars
Printed in China www.foodsaver.com P.N. 143707
SPR-052110
© 2010 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved. Distributed by
Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FoodSaver Jar Sealer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FoodSaver Jar Sealer in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info