Manual FoodSaver GameSaver bronze (page 6 of 10) (English)

610573

Zoom out

Zoom in

1/10

www.foodsaver.com 1-877-777-8042 www.foodsaver.com 1-877-777-8042

TROUBLESHOOTING

MAINTENANCE

9 10

To Clean Appliance:

Remove Power Cord from electrical outlet. Do not

immerse in liquid.

Check Gaskets and around Drip Tray to make sure

they are free from food materials. Wipe off gasket

with warm soapy cloth if needed. Bottom gasket

may be removed for cleaning. Clean with warm,

soapy water.

The Removable Drip Tray makes cleanup easy when

small amounts of liquids are inadvertently pulled

into the Vacuum Channel during vacuum process.

Empty Drip Tray after each use. Wash in warm

soapy water or place in top rack of dishwasher. Dry

thoroughly before re-inserting into the appliance.

Always leave lid latch in open or store position,

never leave in closed position. When appliance

is left in closed position, the gaskets become

compressed and the unit may not function properly.

Do not leave appliance outside in the environment

while not in use.

Care and Cleaning

Problem Solution

Red Seal LED flashes. • Unit is overheated, wait for 20 minutes for unit to cool down.

• If trying to seal an end of a roll to make a bag, make sure the bag is on the

seal strip.

• If storing unit, make sure that latch is in Store position and not Locked

position. If in Locked position for extended period of time the gaskets

become compressed.

• Replacement Gaskets are available for purchase. Please call 1-877-777-8042 if

you need assistance.

Pump is running

for more than 2

minutes without bag

vacuuming (no visible

air coming out of bag).

• Make sure bag is inserted curl down in the vacuum channel.

• Check to make sure top and bottom gaskets are inserted properly.

• Check to make sure that that at least one end of bag is sealed.

• Open unit and check to make sure that there are no foreign objects, dirt or

debris on the top or bottom gasket.

• Make sure there is enough room at top of bag (3 inches) to fit to middle of

drip tray with lid closed and latched.

• Make sure accessory hose is not attached.

• Make sure the lid is latched down all of the way.

• Do not store unit in locked position as this will compress the gaskets. If this

has occurred, leave the door of the unit open for a period of time to allow

gaskets to expand/restore to their original size.

Bag is not sealing

properly.

• There is too much liquid in bag, freeze bag contents before vacuuming.

• To prevent wrinkles in the seal, gently stretch bag flat while inserting bag into

vacuum channel and continue to hold bag until vacuum pump starts.

• Create a second seal above the first seal on the bag to ensure a proper seal.

There are no lights on

the control panel.

• Make sure unit is plugged in.

• Make sure wall outlet is functional.

• Make sure latch is in Locked position.

Nothing happens

when latch is closed

and Vac/Seal or Seal

button is pressed.

• Make sure unit is plugged in.

• Make sure wall outlet is functional.

• Open latch, make sure lid is all the way down, re-latch lid.

Troubleshooting

Tips

for using Your FoodSaver

GameSaver

Appliance

Tips on Sealing a Bag

When making a bag from a roll, make sure end of

cut piece is on Sealing Strip, not over rubber gasket

or in Vacuum Channel.

Prevent moisture or liquid from being pulled into the

Vacuum Channel or trapped in the seal. Either pre-

freeze moist foods such as raw meat for

1–2 hours before vacuum packaging, or place a

folded paper towel between food and end of bag

to absorb excess liquids. Be sure to leave at least

3 inches between paper towel and end of bag so

that bag seals properly with paper towel inside.

Tips on Removing Air from a Bag

When vacuum packaging make sure open end of

bag is inside Drip Tray with curl down. Also make

sure roll itself is tucked back into Roll Storage

Compartment or it could prevent appliance from

operating properly.

Check for wrinkles in the bag along the Sealing Strip

before closing lid and vacuum packaging. Wrinkles

in seal may cause leakage and allow air to come

back into bag. If you find wrinkles after sealing bag,

simply cut bag open and vacuum package again.

If Motor runs for more than 30 seconds without

stopping, you may need to adjust bag and try

again. If you are making initial seal on a piece of

bag material with two open ends, make sure you

have pressed the Seal and not Vac/Seal Button. If

you are vacuum packaging with a bag, make sure

open end is placed down inside Vacuum Channel

and make sure Accessory Hose is not attached. Also

check that gasket is clean and free of debris. If you

are vacuum packaging with an accessory, check

Accessory Hose in appliance lid and in accessory

to ensure a tight fit.

TIPS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of FoodSaver GameSaver bronze in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

FoodSaver GameSaver bronze Manual

Product: