783497

FoodSaver FSFSMA0050 Manual

3
Zoom out
Zoom in
Previous page
1/16
Next page
UK
FoodSaver® Quick Marinator Accessory
Your FoodSaver® Quick Marinator is the perfect accessory
for marinating foods. Your food will marinate in minutes when
vacuum packaged because the vacuum process opens
the pores of the food which allows the food to absorb the
marinade more quickly. Your FoodSaver® Quick Marinator can
be used with FoodSaver® vacuum sealers with or without the
built-in marinate function.
FoodSaver® Vacuum Sealers WITH Marinate Function
Some FoodSaver® vacuum sealers have a built in marinate
function designed to be used with your Quick Marinator. The
marinate function consists of a series of timed vacuuming and
resting cycles which speed up the marinating process. If your
FoodSaver® vacuum sealer has the marinate function proceed
as follows:
1. Prepare enough of the marinade to fully cover the food
inside your Quick Marinator. Always leave at least 2.5 cm
of space between the food and the rim of the base A.
2. Make sure the rubber seal on the lid and the rim of the
base are clean and free from food debris which might
prevent it from sealing properly. Fit the lid to the base
B.
3. Turn the white knob on the lid of your Quick Marinator
fully clockwise until it stops C. The arrow on the knob
should be pointing at the LOCKED symbol ( ).
4. Connect one end of the accessory hose to your vacuum
sealer and the other end to the hole in the centre of the
knob D.
5. Turn the knob anticlockwise until the arrow is pointing
to the OPEN symbol ( ) E. The knob must be in this
position whenever you use a FoodSaver® vacuum sealer
which has the built in marinate function.
6. Press the Marinate button on your vacuum sealer.
7. Your FoodSaver® vacuum sealer will now begin its
marinating cycle.
When the marinate cycle has ended, simply remove
the accessory hose, open the lid and remove the food.
Alternatively, if you want to store the food in your Quick
Marinator before using it, turn the knob to the LOCKED
symbol ( ) before removing the accessory hose.
FoodSaver® Vacuum Sealers WITHOUT Marinate Function
If your FoodSaver® vacuum sealer does not have a specific
marinate function proceed as follows:
1. Follow steps 1 to 4 above.
2. Turn the knob anticlockwise until the arrow is pointing to
the symbol F.
3. Press the Vacuum and Seal button on your FoodSaver®
vacuum sealer.
4. Wait until your vacuum sealer motor stops then turn the
knob to the LOCKED symbol ( ).
5. Remove the accessory hose. Place your Quick Marinator
in the refrigerator and allow to marinate for 15-20
minutes.
Troubleshooting
If a vacuum is not being created:
• For your Quick Marinator to work correctly, it is vital that
the rim of the base and the rubber seal of the lid are
clean and free from food debris.
• Examine the rim of the canister for any cracks or
scratches. Any damage to the seal or rim can prevent
your Quick Marinator from creating a vacuum.
• Make sure your Quick Marinator is not too full. Always
leave at least 2.5 cm between the contents and the lid.
• Make sure that both ends of the accessory hose are
securely inserted.
Care and Cleaning
LID: The lid should be wiped with a damp cloth. DO NOT
immerse the lid in water. DO NOT wash the lid in a
dishwasher.
BASE: Wash the base in warm soapy water. Alternatively, the
base may be washed in a dishwasher (top rack only).
Dry all parts thoroughly before using.
Your FoodSaver® Quick Marinator should not be used in the
freezer.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FoodSaver FSFSMA0050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FoodSaver FSFSMA0050 in the language / languages: All languages as an attachment in your email.

The manual is 0.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info