610541
19
Zoom out
Zoom in
Previous page
1/24
Next page
Problem
Solution
Red Seal LED
Flashing
Unit is overheated. Always allow 20 seconds between seals. Under heavy
usage, appliance will shut off automatically and Red Light will flash. Wait
for 20 min. for unit to cool off.
Always wait 20 seconds between seals.
Latch has been left in OPERATE position: Gaskets may be compressed.
Unlatch and allow 10 to 20 minutes for Gaskets to expand.
Vacuum pump running more than 120 seconds. Under heavy usage,
appliance will shut off automatically and Red Light will flash. See next
section Vacuum Pump is running, but bag is not evacuating.
Vacuum Pump is
running, but bag
is not evacuating
If making a bag from a roll, make sure one end of bag is sealed. See How
to Make a Bag from a FoodSaver
®
Vacuum Sealing Roll.
Adjust the bag and try again. Make sure the open end of the bag in down
inside the vacuum channel.
Check for wrinkles in bag along Sealing Strip. To prevent wrinkles in the
seal, gently stretch bag flat while inserting bag into Vacuum Channel.
Open unit and make sure Gaskets are inserted properly and there are no
foreign objects, dirt or debris on the Upper or Lower Gasket (See Care and
Cleaning).
Latch has been left in OPERATE position: Gaskets may be compressed.
Unlatch and allow 10 to 20 minutes for Gaskets to expand.
Make sure the accessory hose is not attached to accessory port.
Make sure the lid is latched down all the way. If the Latch does not catch
the lid and bring it down, there will be a leak between the Gaskets.
Gasket is loose or
has a tear
Take out the gasket, clean it and reinsert the Gasket into the Vacuum
Channel (See Care and Cleaning).
Call 877-777-8042 or visit website for replacement.
Bag is not sealing
properly
Too much liquid in bag, freeze before vacuuming.
Check for food debris around seal area. If present, Take out the gasket,
clean it and reinsert the Gasket into the Vacuum Channel (See Care and
Cleaning).
Bag has wrinkles: To prevent wrinkles in the seal, gently stretch bag flat
while inserting bag into Vacuum Channel.
No lights on the
control panel
Make sure unit is plugged in.
Make sure wall outlet is functional.
Make sure lid is all the way down, and the Latch is in the
OPERATE position.
16 www.FoodSaver.com
Troubleshooting
TROUBLESHOOTING
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FoodSaver FM2000 Models at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FoodSaver FM2000 Models in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info