624392
24
Zoom out
Zoom in
Previous page
1/25
Next page
Saffire PRO 40 Spezifikationen
MIC
Frequenzgang: 20Hz - 20kHz +/- 0.1 dB.
THD+N: 0.001% (bei 1kHz mit 20Hz/22kHz Bandpass Filter).
Noise: EIN > 125dB (128dB analog zu digital): bei ~60dB Gain mit 150 Ohm Abschluss (20Hz/22kHz Bandpass Filter).
LINE
Frequenzgang: 20Hz - 20kHz +/- 0.1dB.
THD+N: <0.001% (bei 0dBFS equivalent Input und 22Hz/22kHz Bandpass Filter).
Noise: -90dBu (22Hz/22kHz Bandpass Filter).
INSTRUMENT
Frequenzgang: 20Hz - 20kHz +/- 0.1dB.
THD+N: 0.004% (measured with 0dBu input and 20Hz/22kHz Bandpass Filter).
Noise: -87dBu (20Hz/22kHz Bandpass Filter).
DIGITAL PERFORMANCE
Clock Quellen: Interne Clock. Sync zu Wordclock via S/PDIF (coaxial Input). Sync zu Wordclock via ADAT Input. Sync zu Wordclock via
optical S/PDIF Input (wenn eingeschaltet).
A/D Dynamik Range 110dB ‘A-weighted’ (alle Inputs).
D/A Dynamik Range 110dB ‘A-weighted’ (alle Outputs).
JetPLLTM PLL Technologie für hervorragende Jitter Reduktion, herausragende Wandler Performance.
Clock Jitter < 250 Pico Sekonden.
Sampleraten: 44.1 bis 96kHz.
20 Input Kanäle zum Computer: Analog (8), S/PDIF (2), ADAT (8) und Mix Loop-back (2).
20 Output Kanäle vom Computer: Analog (10), S/PDIF (2) und ADAT (8).
Frei konfigurierbarer 18 In 16 Mixer.
Gewicht und Dimensionen
• 3kg - 35cm x 4.5cm x 26.5cm.
ANALOG EINGÄNGE
Mic / Line Inputs XLR Combo mit Auto-Schaltung zwischen XLR und Klinke symmetrisch.
Mic / Line / Instrument 1 & 2: 2 x XLR Combo auf der Front.
Mic / Line 3-8: 6 x XLR Combo.
Instrument: Wie oben, schaltbar auf Instrument (nur Inputs 1 & 2).
Mic Gain: +10dB bis + 55dB.
Line 1-8 Gain: -10dB bis +36dB.
Instrument Gain: +10dB bis +55dB.
Input Pad auf Inputs 1-2, -9dB.
Phantompower schaltbar in Gruppen von 4 Kanälen für Mic 1-4 und 5-8.
Mic und instrument maximum Input Level +7dBu (+16dBu mit Pad an Input 1 und 2).
Line maximum Input Level +22dBu.
ANALOGUE AUSGÄNGE
Line Level 10 x 6,35mm Klinke symmetrisch.
Output Monitor 1 und 2 mit Einschalt-Lautsprecherschutzschaltung.
Nominal Output Level 0dBFS = 16dBu, symmetrisch.
Frequenzgang: 20Hz – 20kHz +/- 0.2dB.
THD+N <0.0010% (-100dB) (bei 0dBFS Input 22Hz/22kHz Bandpassfilter, unweighted).
Software schaltbare Absenkung (-20dB) für Output 1 und 2 (für eingangsempfindliche Aktivmonitore).
Hardware und Software steuerbarer Digital Volume Regler für alle Ausgänge (zuweisbar in Steuersoftware).
Hardware und Software steuerbare digitale Dim und Mute Funktion für alle Ausgänge (zuweisbar in Steuersoftware).
Alle Ausgänge sind als Monitorausgang einsetzbar.
24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Focusrite Saffire PRO 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Focusrite Saffire PRO 40 in the language / languages: German as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Focusrite Saffire PRO 40

Focusrite Saffire PRO 40 User Manual - English - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info