624388
30
Zoom out
Zoom in
Previous page
1/45
Next page
30
S/PDIF Output Mix (unit 2)
Click on the second mixer tab.
Ensure that the mixer output is stereo by clicking on the stereo button (below the meters of the output channel).
The input configuration will be the same as in the first mixer, set the levels and panning as required.
The S/PDIF input to the mixer should be MUTED (this prevents feedback).
Rename the mix to “S/PDIF Mix” (or similar) by clicking on the name field (below the meters of the output channel).
The S/PDIF output Mix will just be a mix of the audio inputs on unit 2. The S/PDIF input will be muted to avoid feedback, and the mix
will be sent out of the S/PDIF output to unit 1. The configuration is as follows:
Alternative options
The above set-ups allow mixing and monitoring of only the analogue inputs connected to both Saffire PRO 40s. 8 channels of
analogue plus 2 channels of S/PDIF use a total of 10 mixer channels. There are an additional 8 channels that can be used to mix and
monitor additional signal sources - whether it be DAW outputs or ADAT inputs. Simply add these to both the MONITOR Mix and S/
PDIF Mix.
By selecting ADAT or analogue inputs/outputs rather than S/PDIF inputs/outputs, it is possible to achieve latency-free monitoring
via either ADAT or the analogue inputs/outputs if desired.
It is also possible to send individual audio channels between the units, rather than a stereo mix of inputs. This can be done by
selecting individual inputs in the routing panel in the bottom left-hand corner of MixControl, rather than the mixes created above.
SPDIF Mix to Unit 1 sent via SPDIF
SPDIF to UNIT1 Selected SPDIF from Unit 1 mutedUnit 2 Analogue Ins Master fader Set to 0
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Focusrite Saffire PRO 14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Focusrite Saffire PRO 14 in the language / languages: English as an attachment in your email.

The manual is 7,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Focusrite Saffire PRO 14

Focusrite Saffire PRO 14 User Manual - German - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info