624388
12
Zoom out
Zoom in
Previous page
1/45
Next page
12
Pre-amp section
When connecting a microphone to the Safre PRO 14, you must connect an XLR cable to the combo inputs on the front panel. When
connecting either line level signal or instrument signal to the combo inputs, you must select either ‘Line’ or ‘Inst’ from the pre-amp
section.
Additional Line level sources can be connected to inputs 3 and 4 on the rear of the unit. The pre-amp gain for inputs 3 and 4 can be
set to either Lo (low) or Hi (high) gain. The maximum input level before the signal will clip for each setting is as follows:
Low gain: 0dBFS = +16dBu
High gain: 0dBFS = -10dBV (~-6dBu)
Mixer section
The Saffire MixControl software includes a total of 6 mixes, each with a maximum of 18 channels in the mix. Up to 6 mono mixes or 3
stereo mixes, (or any combination of mono and stereo mixes) are available, making up a total of 6 mix channels.
The Mixer Section is used to create mixes for monitoring purposes. The mixes you create do not affect how the audio inputs
are routed to the DAW, nor does it affect the audio level of the recorded signal. What you set up in the mixer section of Saffire
MixControl only affects what is heard in the outputs of the mix.
The recording levels that are sent to the DAW are therefore only affected by the input gain settings on the Saffire PRO 14, not the
mixer.
The mixer section is useful for creating different simultaneous mixes. For example, you may wish to provide a headphone monitor
mix for the recording artist that is different to the mix heard in the monitor speakers.
For example, the artist needs to hear mainly the backing track, and a little of the recorded input signal. The engineer needs to hear
mainly the recording artist’s signal and a little of the backing track.
A separate mix can be created for both artist and engineer with the exact levels desired. Each independent mix is created on a
different mix tab.
Mixer tab
Each mix can be selected by clicking on the corresponding mixer tab.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Focusrite Saffire PRO 14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Focusrite Saffire PRO 14 in the language / languages: English as an attachment in your email.

The manual is 7,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Focusrite Saffire PRO 14

Focusrite Saffire PRO 14 User Manual - German - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info