624385
9
Zoom out
Zoom in
Previous page
1/19
Next page
9
Front Panel . . . Continued
6. OLED Display
Indicates the currently selected channels network name and its gain value and
if either Control Lockout or Gain Compensation is active. Also changes to
display local and network configuration settings when in INFO mode. See below.
7. Local Control Buttons:
INFO Press to show device and network information on the OLED display [button will
flash orange when Info mode is engaged]. Pressing again cycles through following unit
settings:
Unit IP addresses (primary)
Unit IP addresses (secondary)
Unit MAC addresses (primary)
Unit MAC addresses (secondary)
Firmware Version for the unit
Device name
+48V – Switches phantom power on for selected channel.
2.4 kΩ – Selects low input impedance for selected channel.
– Switches on high-pass filter for selected channel.
-20 dB – Switches input pad in for selected channel.
Ø – Inverts polarity of signal on selected channel.
8. Encoder
The detented encoder is used as the gain control for the selected mic channel.
Note: When renaming a device, the name will appear on a single line on the OLED display. To separate the
name over two lines like the OLED example above, add in a double-dash ‘--‘. In the example above, this would
be written as ‘mp8r--b-vox-1’.
ON
87
6
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Focusrite Rednet-MP8R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Focusrite Rednet-MP8R in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info