624402
46
Zoom out
Zoom in
Previous page
1/55
Next page
46 Control 2802 Operating Manual
Connector Wiring & Specications
Connector Wiring & Specications
For an overview of the rear panel connections, please see
page 8. This section provides technical data including
wiring and pin-out diagrams.
XLR Connections
All XLR balanced input and outputs are wired as:
Pin 1 shield (chassis/shield ground)
Pin 2 hot (+ve)
Pin 3 cold (-ve)
TRS Jack Connections
All 1/4” TRS jacks are wired as:
Tip (+ve)
Ring (-ve)
Sleeve (shield)
Channel Strip Inputs and Outputs
Each of the 8 channel strips provide:
MICROPHONE INPUT (balanced, female XLR):
Input impedance is >2.5k Ohms.
Maximum input level is approx. +16dBu
(where 0dBu is referenced to 0.775Vrms).
LINE INPUT (balanced, 1/4” TRS jack):
Input impedance is >10k Ohms.
Maximum operating level is +27dBu.
INSERT SEND (balanced, 1/4” TRS jack):
Output impedance is 150 Ohms.
Drive capability is +21dBu.
INSERT RETURN (balanced, 1/4” TRS jack):
Input impedance is >10k Ohms.
Maximum input level is +21dBu.
25-pin D-Sub Connections
The remaining channel strip connections and Summing Input
are found on three 8-way female DB25 connectors at the
bottom of the rear panel:
DB25 Tascam DA-88 Wiring Specication
Each conforms to the Tascam DA-88 wiring specication for an
eight-channel balanced analogue 25-pin D-Sub as follows:
DAW INPUTS 1-8 (balanced, 8-way female DB25)
Input impedance is >10k Ohms.
Maximum input level is +27dBu.
DIRECT OUTPUTS 1-8 (balanced, 8-way female DB25)
Output impedance is <75 Ohms.
Maximum output level is +27dBu.
SUMMING INPUT 1-8 (balanced, 8-way female DB25)
Input impedance is >10k Ohms.
Maximum input level is +27dBu.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Focusrite Control 2802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Focusrite Control 2802 in the language / languages: English as an attachment in your email.

The manual is 31,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info