624408
6
Zoom out
Zoom in
Previous page
1/20
Next page
6
Hardware Features
Front Panel
5 4
6
7
13
151512 1614 16 17
1
2 819 198 11 183 109
Repeated for each channel
Repeated for channel 2 Repeated for channels 3 to 8
The front panel includes all the input gain controls and monitoring controls as well as two input
sockets for instrument jacks and two headphones sockets.
1. INST INPUTS 2 x high impedance inputs on ¼” TS jack sockets for Channels 1 and 2: connect
a musical instrument (e.g., guitar) here.
2. MIC, LINE & INST two sets of three red LEDs indicating the input currently selected for
Channels 1 and 2. Mic/Line/Inst selection is made from Focusrite Control.
3. MIC & LINE – six pairs of red LEDs indicating the input currently selected for Channels 3 to 8.
Mic/Line selection is made from Focusrite Control.
4. Input gain controls 1 to 8 eight rotary controls: adjust the input gain for the signals in
Channels 1 to 8 respectively.
5. 48Vone switch per channel: enables 48 V phantom power at the corresponding rear panel
XLR mic input. Each switch has an associated red LED indicating that phantom power is
selected.
6. Hi-pass filters one switch per channel: use to remove unwanted low-frequencies.
Filter is -3 dB at 80 Hz with a slope of 12 dB/octave. Each switch has an associated red LED
indicating that the filter is active.
7. Phase reverse one switch per channel. Each switch has an associated red LED indicating
that the phase is reversed.
8. AIR eight yellow LEDs one per channel; illuminate when the AIR function is selected
from Focusrite Control. AIR modifies the frequency response of the input stage to model the
classic, transformer-based Focusrite ISA mic preamps.
9. Input signal level meters: eight LED bargraphs, one per channel. Segments indicate -42, -18
& -12 dBFS (green), -6 & -3 dBFS (yellow) and 0 dBFS (red). Input signals are metered post
the input gain controls, so you can see the levels being sent to the DAW.
10. Output signal level meters: two LED bargraphs indicating the signal level at Outputs 1 and 2.
Indications as input meters. Output signals are metered pre the monitor level control, so the
volume you have set is independent of the meter indications.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Focusrite Clarett 8PreX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Focusrite Clarett 8PreX in the language / languages: English as an attachment in your email.

The manual is 3,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info