624377
6
Zoom out
Zoom in
Previous page
1/18
Next page
6
Hardware Features
Front Panel
24
5 5
4 2
6
7
1 3 3 8 9101
The front panel includes all the input gain and monitoring controls as well as two of the input
connectors for Mic, Line and Instrument signals.
1. INPUTS 1 & 2 “Combo XLR” input sockets for each channel - connect microphones, instruments
(e.g., guitar), or line level signals via XLR or ¼” jacks as appropriate. Either TRS (balanced) or
TS (unbalanced) jack plugs can be used for instruments or line level signals.
2. 48V two switches enabling 48 V phantom power at the XLR contacts of the Combi connectors
for mic inputs 1 and 2 respectively. The switches each have an associated red LED indicating
that phantom power is selected.
3. Gain 1 and 2 two rotary controls: adjust the input gain for the signals at Inputs 1 and 2
respectively. The gain controls have concentric bi-colour LED ‘halosto confirm signal level:
green indicates an input level of at least -24 dBFS (i.e., signal present’), the ring then turns
red when signal level reaches 0 dBFS.
4. INST two red LEDs which illuminate when INST mode is selected for the jack contacts of
Inputs 1 or 2 from Focusrite Control software. When INST is selected, the gain range and input
impedance are altered (relative to LINE), and the input is made unbalanced. This optimises
it for the direct connection of instruments via a 2-pole (TS) jack plug. When INST is off, the
inputs are suitable for the connection of line level signals. Line level signals may be connected
either in balanced form via a 3-pole (TRS) jack or unbalanced, via a 2-pole (TS) jack.
5. AIR two yellow LEDs which illuminate when the AIR function is selected for each input
from Focusrite Control. AIR modifies the frequency response of the input stage to model the
classic, transformer-based Focusrite ISA mic preamps.
6. (Thunderbolt active) a green LED which illuminates when the unit has established a
connection with the computer to which it is connected.
7. (Locked) a green LED which confirms clock synchronisation, either to the Clarett 8Pre’s
internal clock or to an external digital input.
8. MONITOR main monitor output level control this control will normally control the level
at the main monitor outputs on the rear panel, but can be configured in Focusrite Control to
adjust the level of any of the unit’s four analogue outputs.
9. (Headphones) connect a pair of stereo headphones at the ¼” TRS jack socket below
the control. The headphone output always carries the signals currently routed to analogue
outputs 3 and 4 (as a stereo pair) in Focusrite Control.
10. POWER – green LED confirming that DC power is connected.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Focusrite Clarett 2Pre at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Focusrite Clarett 2Pre in the language / languages: English as an attachment in your email.

The manual is 5,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Focusrite Clarett 2Pre

Focusrite Clarett 2Pre User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info