EN-56 Original User Guide | Pedelec Shimano Steps E8000 Version 1
DescriptionCauseRemedy
No displaya) No powera) Press the button.
b) The battery is not suciently charged.b) Charge the battery and try again.
c) The battery is charging.c) The system cannot be switched on when the battery is charging. Wait until the battery
is completely charged, or interrupt the charging process.
d) The display is not properly mounted on the bracket.d) Install the bicycle computer correctly.
e) The power cable connector is not properly connected.e) Check whether the power cable connector which connects the motor unit to the drive
unit is disconnected. If you are unsure, contact your dealer.
f) A component which the system does not recognise has been
connected.
f) Contact your dealer.
Three acoustic signals are
heard.
This indicates an error or a warning.Follow the instructions relating to the relevant code.
There is signal interference.This is not a fault. Turn o the signal.
Two audible signals are heard
when the assistance button is
pressed. In addition, it is not
possible to press the button.
The operation of the pressed button has been deactivated.This is not an error.
9.3 Battery
DescriptionCauseRemedy
The battery does not charge.a) The battery charger plug is not rmly inserted into the socket.a) Unplug the battery charger power plug from the socket. Reinsert the plug. Repeat the
charging process. If it is still not possible to charge the battery, contact your dealer.
a) The battery charger charging connector is not rmly inserted
into the battery.
b) Unplug the battery charger charging connector from the battery charging socket, and
reinsert. Repeat the charging process. If it is still not possible to charge the battery,
contact your dealer.
c) Damaged battery.c) Damaged batteries must not be charged or used for any other purpose. Contact
your cycle dealer. The battery may have to be replaced.
d) Battery charger is faulty.d) Have your charger checked out by your cycle dealer; it may have to be replaced.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Focus Shimano E8000 - 2016 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Focus Shimano E8000 - 2016 in the language / languages: English as an attachment in your email.
The manual is 7.74 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
