780057
100
Zoom out
Zoom in
Previous page
1/104
Next page
Original User Guide | Pedelec Impulse Evo / Impulse Evo Next Version 4 EN-99
Display message Cause Remedy
“Setting cannot be requested from/by
motor.
Cable connection defective. Contact your cycle dealer to have the cable connection checked and/or repaired.
“Check speed sensor” a) The spoke magnet has
slipped.
a) Check whether the spoke magnet has slipped. It should be as close as possible to the speed sensor on the
chain stay (max. 10 mm). Align the magnet with the marker point on the speed sensor.
b) The speed sensor is faulty. b) Contact your cycle dealer to have the speed sensor replaced.
c) Spoke magnet missing. c) Contact your cycle dealer. He will be able to replace the spoke magnet.
d) Assist mode is queried at
standstill.
d) The message should disappear when travelling at over 6 km/h.
“Back pedal sensor: \n“\ /Hardware
defective”
Coaster sensor defective. Contact your cycle dealer. The motor may have to be replaced.
“Waiting for drive” Motor is not ready yet. The message should disappear after 5 to 6 seconds.
“No 36 V battery voltage” a) No connection to battery. a) Remove battery and reinsert it.
b) Dirty contacts. b) Clean the battery discharge plug and docking station contacts with a soft, dry cloth.
c) The battery is damaged. c) Damaged batteries must not be charged or used for any other purpose. Contact your cycle dealer.
The battery may have to be replaced.
d) Battery not charged. d) Charge the battery.
“Fault with rotor magnet” The motor unit is faulty. Contact your cycle dealer. The motor may have to be replaced.
“Fault with rotor sensor” The motor unit is faulty. Contact your cycle dealer. The motor may have to be replaced.
“Back pedal sensor / range fault” Coaster sensor defective. Contact your cycle dealer. The motor may have to be replaced.
Start of transfer failed Transfer fault 1. Switch the system off and back on three times 6.3 Overview and basic functions Page EN-47.
Init. transfer failed
Data transfer failed
End transfer failed
Fault: Address not within permitted range Possibly out-dated software
version
1. Switch the system off and back on 6.3 Overview and basic functions Page EN-47. If the fault message
persists, contact your cycle dealer. The system software may need updating.
Fault: No address received
Fault: Unable to save data
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Focus Impulse Evo - 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Focus Impulse Evo - 2018 in the language / languages: English as an attachment in your email.

The manual is 11.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Focus Impulse Evo - 2018

Focus Impulse Evo - 2018 User Manual - German - 106 pages

Focus Impulse Evo - 2018 User Manual - Dutch - 104 pages

Focus Impulse Evo - 2018 User Manual - French - 106 pages

Focus Impulse Evo - 2018 User Manual - Spanish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info