780056
30
Zoom out
Zoom in
Previous page
1/34
Next page
30 Original User Manual | Pedelec Impulse 2.0 Ergo
10 Troubleshooting
TEXT CAUSE REMEDY
Battery heats up to above 45°C
during charging.
High ambient temperatures Stop the charging process and allow the battery
to cool down. Then charge the battery in a cooler
environment. If the problem still occurs, contact
your specialist cycle shop; the battery may need
to be replaced.
Damaged battery Damaged batteries must neither be charged nor
used in any way. Contact your specialist cycle
shop; the battery may need to be replaced.
Battery will not charge. Ambient temperature is too
high or too low
You can charge the battery at temperatures
between 0°C and 45°C.
Battery is damaged. Accident or fall with your
Pedelec, or the battery has
been dropped.
A damaged battery must neither be charged nor
used in any way. Contact your specialist cycle
shop; the battery may need to be replaced.
Range of the battery seems low. Capacity of the battery cells
depends on the temperature.
Protect the battery om heat by standing your
Pedelec in the shade, for example.
“Speed sensor signal missing” Spoke magnet has slipped
out of position
Make sure the spoke magnet has not slipped. It
should be as close as possible to the sensor on the
chain stay (max. 5 mm clearance).
1
2
1 Spoke magnet
2 Sensor on chain stay
Speed sensor defective Consult your specialist cycle shop.
Cable connection defective Consult your specialist cycle shop.
“Battery communication error No connection between motor
and battery
Connect the battery to the charger.
Use a dierent battery.
Consult your specialist cycle shop.
Charging of your 17 Ah battery
ends before completion.
You have run the battery
down to empty
Pull the mains plug out of the charger and then
plug it in again. Now the battery should charge
lly. If the problem persists, please contact your
specialist cycle shop.
The LED in the charger (where
present) is ashing red.
In this case, the charging
current is too high
Disconnect the battery om the charger and then
connect it again. If the error message still ap-
pears, contact your specialist cycle shop to check
the battery and charger.
“Motor temperature is too high” The motor has overheated.
For example, aer riding up
a long, steep incline in a high
gear.
Allow the motor to cool down before resuming
your journey.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Focus Impulse 2.0 Ergo - 2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Focus Impulse 2.0 Ergo - 2013 in the language / languages: English as an attachment in your email.

The manual is 5.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Focus Impulse 2.0 Ergo - 2013

Focus Impulse 2.0 Ergo - 2013 User Manual - German - 34 pages

Focus Impulse 2.0 Ergo - 2013 User Manual - Dutch - 36 pages

Focus Impulse 2.0 Ergo - 2013 User Manual - French - 36 pages

Focus Impulse 2.0 Ergo - 2013 User Manual - Italian - 36 pages

Focus Impulse 2.0 Ergo - 2013 User Manual - Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info