780054
83
Zoom out
Zoom in
Previous page
1/86
Next page
Original User Guide | Impulse 2.0 Pedelec Version 3 EN-83
Display Cause Remedy
"Communication error with the battery"/
Battery charge level indication on the
displayashes
a) No connection to battery. a) Remove battery and reinsert it.
b) Dirty contacts. b) Clean the battery discharge plug and docking station contacts with a soft, dry cloth.
c) The battery is damaged. c) Damaged batteries must not be charged or used for any other purpose. Please ask your dealer;
the battery may have to be replaced.
d) Battery not charged. d) Charge the battery.
"Motor temperature is too high" The motor has overheated. For
example, after riding up a long,
steep incline in a high gear.
Allow the motor to cool down before resuming your journey.
"Battery temperature is too high" The battery has overheated. Allow the battery to cool down for a while by riding without motor assist.
"Battery temperature is too low" The temperature of the battery
is too low, e.g. after a very cold
night outdoors.
Store the battery in a warm room for a while so that it reaches a sufficient temperature.
Permanent display: "Please move the
pedals"/"PEDAL".
Caster switch may be faulty. Turn the pedal crank backwards briefly, then forwards again so that a system check can be carried out. If the
"Please move the pedals"/"PEDAL" message is still displayed, please contact your dealer. The motor may have
to be replaced.
9.2 Battery
Display Description Cause Remedy
 5LEDsrapidlyashingafter
pressing the battery button.
a)Batteryisatandisdisabled. a)Ifthebatteryisat,itwillworkagainbrieyafterashortrecoveryperiod,thenswitcho
again. It must now be charged 8.3.1 Charging the battery P. EN-75.
b) The battery is overloaded. b) If the battery is overloaded, it switches itself on again after a short rest period and can be used
again as normal.
c) The battery is too cold or too hot. c) The permitted ambient temperature range of the battery during operation is -10 to 40 °C.
The1stLEDashesrapidly
after pressing the battery
button.
There is a charging fault. Unplug the charger from the mains immediately. If the problem reoccurs, a new battery
charger is required.
No LEDs light up after
pressing the battery button.
The battery is faulty. Please ask your dealer. The battery must be replaced.
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Focus Impulse 2.0 - 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Focus Impulse 2.0 - 2016 in the language / languages: English as an attachment in your email.

The manual is 8.88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Focus Impulse 2.0 - 2016

Focus Impulse 2.0 - 2016 User Manual - German - 88 pages

Focus Impulse 2.0 - 2016 User Manual - Dutch - 88 pages

Focus Impulse 2.0 - 2016 User Manual - French - 88 pages

Focus Impulse 2.0 - 2016 User Manual - Italian - 29 pages

Focus Impulse 2.0 - 2016 User Manual - Spanish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info