658410
22
Zoom out
Zoom in
Previous page
1/64
Next page
US-22 Original User Guide | Groove Go pedelec Version 1
6. Ensure that the newly-tightened saddle does not tip; test it by pressing
down on the front and back alternately.
3.3.3 Clamp attachment: Shifting and tilting the saddle
1. Turn the clamping nut clockwise
to loosen it. You may need to
keep the nut on the other side in
place with a second key.
2. Shift the saddle forwards or
backwards as desired.
3. Tilt the bike saddle to the desired angle.
4. Turn the clamping nut clockwise to tighten it. You may need to keep
the nut on the other side in place with a second key. Observe the
correct torque setting.
5. Ensure that the newly-tightened saddle does not tip; test it by pressing
down on the front and back alternately.
3.3.4 Suspension seatpost
WARNING
If your bike is equipped with a suspension seat post, the suspension
mechanism may require periodic service or maintenance. Ask your
dealer for recommended service intervals for your suspension seat
post.
For 1. Loosen clamping nut
3.3.2 Twin-screw supports: Shifting and tilting the saddle
WARNING
Screw the clamping screws fully in a straight position in the nuts.
Failure to do so can result in the screws tearing out of the nuts.
correct
Clamping screw
nut
Fig. 1
wrong
Fig. 2
1. To shift the saddle, loosen the
front and rear screws by turning
them anti-clockwise. Turn the
screws completely two to three
times at most or the whole
mechanism could fall apart.
2. Shift the saddle forwards or
backwards as desired.
3. Tighten the screws using a torque wrench to turn them clockwise.
4. To alter the angle of the saddle, loosen the front screw by turning it
anti-clockwise. Turn the screw completely two to three times at most or
the whole mechanism could fall apart.
5. Tighten the front screw with the same number of turns.
For 1. Loosen screws
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Focus Groove Go - 2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Focus Groove Go - 2017 in the language / languages: English as an attachment in your email.

The manual is 9,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Focus Groove Go - 2017

Focus Groove Go - 2017 User Manual - German - 54 pages

Focus Groove Go - 2017 User Manual - Dutch - 54 pages

Focus Groove Go - 2017 User Manual - French - 54 pages

Focus Groove Go - 2017 User Manual - Spanish - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info