780049

Focus Fazua 2018 Manual

7
Zoom out
Zoom in
Previous page
1/39
Next page
Using your eBike
Switching eBike System on/off
The system can be operated by a FAZUA approved Remote (16). Once the
Drivepack (1) is mounted on the eBike, the system can be switched on by
pressing any of the Remote buttons (17, 18, 19).
For switching off the system:
1. Press and hold the middle button of the Remote (18) for 2 s.
2. Unmount the Drivepack (1) from the eBike (Action D).
3. Switch off the Battery Pack (8) by pressing the on/off button (9) for 2 s.
Setting the Support Level
You can set on the Remote (16) to what extent should the eBike system
support you when pedaling. The support level can be set at any time, even
while riding. To switch the support level, you must press the up/down buttons
(17, 19) on the Remote (16).
The following support levels are available:
Support Level Color Max. Support Factor Max. Power
No Support White 0% 0 W
Breeze Green 75% 125 W
River Blue 150% 250 W
Rocket Pink 240% 400 W
State-of-charge and support level bar
The state of charge/support level bar (21) shows 2 parameters:
• State-of-charge of your Battery Pack (8): indicated by the number of
LEDs that are lit. When fully charge at the Battery Pack (8), all 10 LEDs
are lit. However, if Battery Pack (8) is empty, then no LEDs will light up.
• Selected support level of your eBike: indicated by the shining color of
the LEDs (See previous section Setting the Support Level).
Switching the Walk-assistance mode on/off
To activate the Walk-assistance mode, set your system to “No Support“ mode
on the Remote (16) (See section Setting the Support Level). Then, press and
hold the down button (19) on the Remote (16). After 2 s the Walk-assistance
mode switches on.
Charging the Battery Pack
The Battery Pack (8) can be recharged at any time on its own, within a
Drivepack (1), or within your eBike. Interrupting the charging process at any
moment is also possible.
Connect the power plug (26) of the power cord (25) to the
power socket (24) of the Charger (23). Then connect the mains plug
(country-specic) to the mains supply. Finally, connect the charge
connector (27) into the charge plug (11) of your Battery Pack (8).
Once the Battery Pack (8) is fully charged, the LEDs at the charge-control
indicator (10) turn off. The state-of-charge can now be checked by briey
pressing the on/off button (9) on your Battery Pack (8).
Warning! Read carefully and observe the Battery Pack (8)
instructions.
Warning! Pay attention to your Battery Pack (8) before each use
and before charging. Make sure terminals and surfaces are clean.
Warning! Before using or charging your Battery Pack (8),
always look for signs of damage like cracks or burns. Never
use or charge a damaged Battery Pack (8). Please contact
your FAZUA Service Partner or visit the FAZUA Service Platform
(www.fazua.com/service).
10 11
EN
EN
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Focus Fazua 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Focus Fazua 2018 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info