780046
56
Zoom out
Zoom in
Previous page
1/70
Next page
EN-56 Originalbetriebsanleitung Allgemein
Notice
If it is dicult to draw the cable sleeve out of the
holder in the gearshift unit, insert a 2 mm Allen key or
a #14 spoke in the hole in the ratchet wheel and rotate
it to loosen the cable. Then, rst remove the cable
fastening screw from the ratchet wheel before drawing
the cable sleeve from the cable sleeve holder.
CJ-8S20
JAPAN
LOCK
Turn the
ratchet
wheel Ratchet wheel hole
2 mm Allen key or #14 wrench
Remove the cable fastening
screw
Draw out of the
cable sleeve
holder
1
23
Fig. 131 Tip for removing the cable sleeve ©Shimano
CJ-8S20
JAPAN
LOCK
Cable fastening screw
Ratchet wheel
Fig. 132 Removing the cable fastening screw ©Shimano
6. Loosen and remove the screw on the brake arm.
7. Loosen the wheel nuts and set them aside. Remove the
lock washers from the wheel axle.
8. Pull the rear wheel out of the drop-out slots.
29.3 Dismantling the tyre and tube
1. Unscrew the valve cap, securing nut and eventually the
union nut from the valve.
2. Let the remaining air out of the tube.
3. Place the tyre lever against the valve on the inside
edge of the tyre.
4. Lever the tyre wall over the rim ange.
5. Push the second tyre lever approximately 10 cm away
from the rst between the rim and tyre.
6. Use the tyre lever to lever the tyre over the rim until
the tyre is loose over its entire circumference.
7. Remove the tube from the tyre.
29.4 Repairing the tube
1. Inate the tube.
2. To check where the tube is damaged, place the tube in
a container full of water.
3. Submerge the tube. Air bubbles will escape at the
position of the damage on the tube.
4. If the problem occurs while you are under way, and
you are unable to determine the position of the hole,
simply inate the tube heavily. It will become larger,
and the increased pressure and noise of the escaping
air will allow you to determine the position of the
hole.
5. Allow the tube to dry.
6. You can now repair the tube. Observe the usage
instructions on the repair kit.
Gearshift unit
CJ-8S20
JAPAN
LOCK
Fig. 129 Tip for removing the cable sleeve ©Shimano
3. Set the control element on the handlebars to 1.
4. Draw the cable sleeve out of the cable sleeve holder of
the gearshift unit and remove the cable from the slot
in the bracket.
1 Draw out of the cable sleeve holder
2 Remove from the slot
CJ-8S20
JAPAN
Bracket
Cable sleeve holder
Slot
1
2
Fig. 130 Removing the cable ©Shimano
5. Remove the cable fastening screw from the ratchet
wheel.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Focus 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Focus 2021 in the language / languages: English as an attachment in your email.

The manual is 5.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Focus 2021

Focus 2021 User Manual - German - 72 pages

Focus 2021 User Manual - Dutch - 71 pages

Focus 2021 User Manual - French - 74 pages

Focus 2021 User Manual - Italian - 71 pages

Focus 2021 User Manual - Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info