780046
52
Zoom out
Zoom in
Previous page
1/70
Next page
EN-52 Originalbetriebsanleitung Allgemein
Tighten
Tensioning lever
Clamping
nut
Springs
Axle
Fig. 116 Quick-release skewer on the wheel
1. Open the tensioning lever by folding it by 180˚. OPEN
should now be visible.
2. Check that the wheel is correctly positioned.
3. Close the tensioning lever by swinging the lever by
180˚. CLOSE should now be visible. The lever should
be very easy to move from the beginning of the closing
movement up to halfway. Then, the force required to
move the lever must signicantly increase until the
lever is very dicult to move at the end.
4. a) If the quick-release skewer closes too easily, the
pre-tension must be increased: Hold the tensioning
lever and turn the clamping nut on the opposite side
clockwise. Check whether the correct pre-tensioning
has been achieved by closing the tensioning lever.
b) If the quick-release skewer is too dicult to close,
the pre-tension must be reduced: Hold the tensioning
lever and turn the clamping nut on the opposite
side counterclockwise. Check whether the correct
pre-tensioning has been achieved by closing the
tensioning lever.
5. Close the tensioning lever. The lever must be
positioned in such a way that it cannot be opened
accidentally.
27.2 Attaching wheels with through-axles
Warning
Serious falls due to loose components.
Close the lever as described. Otherwise, the wheel
may become loose while cycling, and you run the
risk of very serious or even fatal injuries. If you are
unsure, have a specialist workshop show you this
setting.
Through-axles are similar to quick-release skewers. While
quick-release skewers in wheels are pushed through the
axle of the hub, through-axles are themselves the axle.
Unlike quick-release skewers, they have a threaded
connection rather than a clamping nut. Through-axles can
the completely screwed on, or can rst of all be screwed on,
and then tightened using a lever, as on a quick-release
skewer. A further option is to attach the wheel using a
T-piece, which is then secured by means of a lever (e.g.,
R.A.T. through-axle).
Thread
Fig. 117 Through-axle Fig. 118 Through-axle with lever
Thread Tensioning lever
Axle
T-piece Rotary wheel
Axle Tensioning lever
Fig. 119 R.A.T. through-axle
27.2.1 Mounting a R.A.T. through-axle
1. Insert the R.A.T. axle with the lever in the open
position through the frame/fork and wheel, until the
T-piece at the end of the R.A.T. axle penetrates the
insert on the other side.
Insert
Fig. 120 Insert the through-axle
2. Turn the lever 90° clockwise until the T-piece hits the
insert. The axle should turn easily, and it should no
longer be possible to pull it out of the frame.
Fig. 121 Rotate the lever clockwise
3. Once the axle is in position, ip the lever to tension
the system.
Fig. 122 Tension the lever
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Focus 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Focus 2021 in the language / languages: English as an attachment in your email.

The manual is 5.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Focus 2021

Focus 2021 User Manual - German - 72 pages

Focus 2021 User Manual - Dutch - 71 pages

Focus 2021 User Manual - French - 74 pages

Focus 2021 User Manual - Italian - 71 pages

Focus 2021 User Manual - Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info