780046
23
Zoom out
Zoom in
Previous page
1/70
Next page
Originalbetriebsanleitung Allgemein EN-23
Components Inspection
Luggage Check it is attached securely.
Observe the maximum loading and
total weight 12. Permissible total
weight Page EN-19, 30. Luggage rack
Page EN-59.
Distribute the luggage so that the
weight is evenly distributed to ensure
safer riding characteristics.
Carbon frame
and parts
6.3 Carbon:
general safety
information
Page EN-13
Examine surfaces for changes
(chipping, deep scratches, holes).
Check the strength of the frame and
components.
Pay attention to unusual noises, such
as creaking or cracking.
16. Bicycle frame
Warnings
Serious falls and accidents caused by broken
components.
Never ride with a bent or cracked frame.
After any accident or fall, you should have your
bicycle checked by a specialist workshop before
riding it again. Undetected faults can lead to
accidents.
The shape of the frame depends on the type and function of
the bicycle. Frames are made from a variety of materials,
such as steel or aluminium alloys, or carbon (carbon bre).
If you own a carbon frame, be sure to read 6.3 Carbon:
general safety information Page EN-13.
16.1 Aluminium and steel frames: rollers
Use with Pedelecs and S-Pedelecs is not approved. Rollers
with rear-wheel axle clamping can be used with motorless
bicycles with an aluminium or steel frame. If the rear wheel
of the bicycle is tted with an R.A.T. through-axle, this can
only be secured to the roller using an adapter. You can get
the correct axle nut from your specialist workshop.
16.2 Carbon frame: rollers
Notice
Do not clamp a carbon frame in a roller using rear
wheel axle clamping. Carbon frames are normally not
designed to withstand this kind of force, and can be
damaged by the roller. There are exceptions, however.
Ask at your specialist workshop or consult the brand
website to nd out whether it is possible to use a roller
with your bicycle.
16.3 Carbon frame: assembly stand
If you want to x your carbon frame in an assembly stand,
only clamp it to the seat post, as the clamping mechanism
may otherwise cause visible or hidden damage to the frame
6.3 Carbon: general safety information Page EN-13.
If your bicycle is tted with a carbon seat post, we
recommend tting an aluminium or steel post for this work.
16.4 Frame with rear suspension
Here, the rear of the main frame is not rigid, but is mounted
so that it can move, and is sprung and dampened with a
shock absorber. Ask your specialist workshop to adjust the
elastic mounts.
Information
The dealer should have adjusted the suspension for
you during delivery. It is possible that your bicycle and
the seating position may look and feel dierent when
riding than what you are used to. The shock absorber
must be tuned so that it responds gently but does not
bottom out when you ride over an obstacle. To do this,
it should sink a little when you sit on your bicycle.
Fig. 15 Frame with suspension
16.5 Cleaning and care
Use a soft brush to clean debris o your bicycle. Be careful
not to scratch the frame. Stubborn dirt can be removed
with a sponge and water or bicycle cleaner. Under no
circumstances should you use a high-pressure cleaner for
cleaning. This could damage the electronic components.
If your frame is tted with elastic mounts, you can clean
these regularly with a slightly damp cloth. Paint damage
and rust spots should be repaired in your specialist
workshop.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Focus 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Focus 2021 in the language / languages: English as an attachment in your email.

The manual is 5.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Focus 2021

Focus 2021 User Manual - German - 72 pages

Focus 2021 User Manual - Dutch - 71 pages

Focus 2021 User Manual - French - 74 pages

Focus 2021 User Manual - Italian - 71 pages

Focus 2021 User Manual - Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info