Manual Focus 2012 (page 27 of 68) (English)

658399

Zoom out

Zoom in

1/68

I General User Manual 27

18.6 Fitting the wheel

Please note that the work steps described here are for a

specic example.

Please observe the information om the relevant manu-

facturer or consult your specialist cycle shop.

18.6.1 Inserting the ont wheel

Bear the running direction of the tyre in mind when

tting the ont wheel.

If your bike is equipped with a disc brake, make sure

that the brake discs are correctly positioned between

the brake pads.

18.6.2 Inserting the rear wheel

18.6.2.1 Bikes with derailleur gears

If your bike is equipped with derailleur gears, put

the chain back onto the smallest sprocket when

tting the rear wheel.

Insert the wheel as far as it will go so it sits cen-

trally in the dropouts.

Tighten the hub nut, or rmly close the quick-

release device (see

Chapter 9.2.2 "Operating the

quick-release device").

18.6.2.2 Bikes with hub gears

Fitting a wheel with gear hub in the ame

1. Fit the chain on the sprocket and oer up the

hub axle to the dropouts.

CJ-NX10

JAPAN

Hub axle

Dropout

18.5 Fitting the tyre and inner tube

Make sure that foreign bodies do not enter the inside

of the tyre. Make sure that the inner tube is crease-

ee and not pinched at all times. When tting the

tyre, bear in mind the running direction. If the tyre

has a running direction, this will be indicated on the

tyre sidewall.

Make sure that the rim tape covers the spoke nip-

ples and is undamaged.

Put the rim with one edge inside the tyre.

Push one side of the tyre completely into the rim.

Insert the valve through the valve hole in the rim

and t the inner tube inside the tyre.

Push the tyre over the rim sidewall.

Pull the tyre forcelly into the centre of the rim.

The area that has already been tted will slip into

the base of the rim.

Check once again that the inner tube is seated

correctly.

Push the other side of the tyre completely over the

rim ange using the heel of your hand.

With Dunlop or Woods valves: Put the valve insert

back into position and screw the cap nut tight.

Inate the inner tube slightly.

Check that the tyre is correctly seated and is true

using the indicator ring on the rim sidewall. Adjust

the seating of the tyre by hand if it does not run

straight.

Inate the inner tube up to the recommended tyre

pressure.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Focus 2012 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Focus 2012

Focus 2012 User Manual - German - 68 pages

Focus 2012 User Manual - Dutch - 68 pages

Focus 2012 User Manual - French - 68 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Focus 2012 Manual

Product: