631671
10
Zoom out
Zoom in
Previous page
1/38
Next page
10 | P a g e
FOBO Tire Plus sensor units are designed to be robust and operate reliably
24x7 to provide tire information around the clock. It is designed to be water
proof (IP57) and by our special use of custom engineering plastics, it will be
able to withstand road salts or other common automotive chemicals (petrol,
engine oil, car wash shampoo, etc.).
Our designers have designed the sensors to ensure that there is no air leakage
as it replaces the tire‟s original valve cap. There is no need to screw on the
sensor extremely tight. Apply a reasonable hand twist force to ensure the
sensor is securely installed and should be able to be removed by hand with
ease.
When installing the sensors, please follow the on-screen prompt of the FOBO
Tire App. Do not screw on the tire sensors until instructed by the FOBO Tire
App. After installation, in the event the tire sensors positions are mixed up,
usually after performing a tire rotation maintenance, you can easily re-
position the sensors to their correct position by selecting „Rotate Tires‟ on the
FOBO Tire Plus App and follow the on-screen instructions. This eliminates
the need to remove the tire sensors physically.
A missing or damaged tire sensor can be replaced easily through the FOBO
Tire App. You will need to purchase a replacement sensor which you can do
so online at www.my-fobo.com. To replace the sensor, first select
„Disable/Install Sensor‟ on the FOBO Tire App on your car status settings and
the App will prompt you to tap on the tire position that you want to replace
for 5 seconds. The box will then show “Disabled”. Then, select
„Disable/Install Sensor‟ again and tap on the same box and the App will
prompt you to install the replacement sensor. Follow the on-screen instruction
and the replacement sensor will be paired and be ready to use.
NOTE: Battery life span up to Two years is an estimate based on normal
use at 23 °C. Battery life may vary according to usage and climatic
temperature.
Battery life span will change due to the following reasons:
1) Frequent change of pressure threshold setting in the App.
2) Disabling & enabling of sensors.
3) Release & pairing.
4) Removal & screw-on of sensors.
5) Operating under extreme cold/hot temperature.
6) Testing of product.
7) Rotation (refer section 5.4 of this user manual)
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FOBO Tire Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FOBO Tire Plus in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info