631673
18
Zoom out
Zoom in
Previous page
1/34
Next page
18 | P a g e
To disable a tire sensor:-
1. Select “Disable/Install Sensor” at the bike status screen setting.
2. Long press the box corresponding to the tire position you want to disable until a
prompt message appears in 5 to 10 seconds. Due to variation in phone models,
glass surface and finger conditions, the prompt message may take longer to
appear or may not appear. Please readjust finger position and long press again.
3. Click OK on the message box to disable the sensor.
4. You will see “Disabled” inside the box corresponding to the disabled tire
position, the box will be greyed out too. Take note that FOBO Bike will stop
monitoring tire for a disabled sensor position.
To install a replacement tire sensor:-
1. Select “Disable/Install Sensor” at the bike status screen setting.
2. Long press the box corresponding to the tire position you want to install until a
prompt message appears in 5 to 10 seconds. This would be the box with the
text “Disabled” for the sensor that you had previously disabled.
3. Click OK on the message box to install the sensor. You will be prompted to
screw on the sensor to the tire valve and hold your smartphone touching the
sensor.
4. You will be prompted that the sensor has been successfully installed and you can
immediately use it.
NOTE: You can only install a replacement sensor after the tire position has
been “Disabled”. You can purchase replacement sensors online from www.my-
fobo.com.
5.6 Release and Uninstall FOBO Bike
To release and uninstall FOBO Bike, do the following steps:-
1. At the Home screen, select the Bike that you want to uninstall/release.
2. Tap the settings icon at the top left of the screen.
3. Select “Release Bike Sensors” and follow the instruction on the screen.
4. You will see “Released” in the corresponding boxes of the released sensor.
5. Repeat step 2 to 4 for the remaining sensors.
6. After all the corresponding boxes are shown “Released”, go back to the home
screen.
7. Swipe right to left on the Bike profile that you wish to remove and click on
„Delete‟ which will appear after you swipe.
NOTE: Do not delete your Bike profile before releasing the sensors. If you have
accidentally done so, re-install the sensors to the same FOBO account and
follow the release procedure above to properly release the sensors.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FOBO Bike for Trike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FOBO Bike for Trike in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info