D2D1
x3
D4 D5
D6
4. Fold down the Cam Lock towards the Handle as illus-
trated in fig D4, and continue to turn clockwise (D5)
until tightened.
5. The Cam Lock can be unlocked and locked as illus-
trated in fig D6.
Repeat for the other side.
D3
Assembly of Upper Handles to Lower Handles
1. Insert the Barrel Nut into the Cam Lock as illustrated
in fig D1.
2. Attach the Upper Handle to the Lower Handle with
the Round Headed Bolt, Washer and Cam Lock as il-
lustrated in fig D2
3. Turn the Cam Lock 3 times clockwise, as illustrated in fig D3.
1
2
E
F
Cutting Height Adjustment
Cutting Height Adjustment (J) & (K)
• Height of cut is adjusted by raising or lowering the
Front and Rear Wheels.
• There are five heights of cut on this product.
• NOTE
A medium height of cut is recommended for most
lawns.
The quality of your lawn will suffer and collection will
be poor if you cut too low.
HEIGHT OF CUT
WHEELS POSITION
Low Front position 1 Also for storage
Back position 1
Low to Medium Front position 1
Back position 2
Medium Front position 2
Back position 2
Medium to High Front position 2
Back position 3
High Front position 3
Back position 3
K
J
1
2
3
Attaching the Cable Hooks (for storage of the mains cable)
1. Insert the post on the Cable Hook (E1) through the hole
in the Upper Handle (E2).
2. Insert the Screw and tighten to secure (F)
Repeat for the other side.
The fixed cable from the switchbox to the motor can
be attached to the handles using the clip on the
Cable Hook (G) and with the Cable Clip provided on
to the Lower Handle (H). Make sure the cable is not
trapped between the Upper and Lower Handles.
G H
