631024

Flymo Glide Master 360 Manual

6
Zoom out
Zoom in
Previous page
1/9
Next page
Removing and fitting the Blade and Fan
R
blade bolt
blade
fan
spacers
Caring for your Lawnmower
Cleaning
IMPORTANT: It is very important that you keep your
lawnmower clean. Grass clippings left in any of the air
intakes or under the hood could become a potential fire
hazard. USE GLOVES.
Switch off and remove the plug from the mains be-
fore cleaning.
It is recommended that you clean your lawnmower
straight after mowing while the grass is still wet.
1. Remove grass from under the hood with the span-
ner/scraper tool provided. (S1)
2. Remove the blade, see Figure R, to gain access to
the fan and clean with a soft brush. (S2)
3. Lever the roller out of position and clean with a soft
brush. (S3)
4. Using a soft brush, remove grass clippings from:
• all air intakes (S4)
• grassbox (S5)
• inside of grassbox lid (S6 & S7)
5. Wipe over the surface of your lawnmower with a dry
cloth.(S8)
• IMPORTANT
Never use water for cleaning your lawnmower. Do not
clean with chemicals, including petrol, or solvents -
some can destroy critical plastic parts.
S1
S8
Removing the Blade and Fan
1. To remove the blade bolt, hold the fan firmly and with
the spanner provided loosen the blade bolt by turning
it anti-clockwise (Q).
2. Remove the blade bolt, blade, spacers and fan. (R)
3. Inspect for damage and clean as necessary.
• Renew your metal blade after 50 hours mowing or
2 years whichever is the sooner - regardless of
condition. If the blade is cracked or damaged re-
place it with a new one. Never use a blade bolt if
the insulated head is damaged cracked or missing.
Fitting the Blade and Fan
1. Ensure the fan is located correctly.(R)
2. Place the spacers onto the fan ensuring the pegs have
located into the holes.(R)
3. Place the blade onto the spacers ensuring the pegs have
located into the holes on the blade and ensuring the
blades is positioned as illustrated in Figure R
4. Place the blade bolt through the centre hole of the blade.
5. Tighten down clockwise by hand.
6. Hold the fan firmly and tighten the blade bolt with the
spanner provided.
S4
S5
S6
S7
S2
S3
6


Need help? Post your question in this forum.

Forumrules
1

Forum

flymo-glide-master-360

Reset search

  • I cannot seem to be able to use or get off the easy reel on top Submitted on 17-10-2018 at 21:26

    Reply Report abuse

  • The blade seems to have dropped - I hit a tree stump. Blade fine but since then the blades appears to have dropped lower therefore cutting into the lawn / dirt Submitted on 13-5-2018 at 11:34

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flymo Glide Master 360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flymo Glide Master 360 in the language / languages: English as an attachment in your email.

The manual is 4,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info