662907

Flymo EasiCut 460 Manual

8
Zoom out
Zoom in
Previous page
1/104
Next page
SAFETY PRECAUTIONS
5.
Service
a)
Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the
power tool is maintained.
Hedge trimmer safety warnings:
•
Keep all parts of the body away from the cutter blade.
Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is off
when clearing jammed material.
A
moment of
inattention while operating the hedge trimmer may
result in serious personal injury.
•
Carry the hedge trimmer by the handle with the cutter
blade stopped. When transporting or storing the
hedge trimmer always fit the cutting device cover.
P
roper handling of the hedge trimmer will reduce
possible personal injury from the cutter blades.
•
Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring or its own cord.
Cutter blades contacting a
"
live" wire may make exposed metal parts of the
p
ower tool "live" and could give the operator an
electric shock.
•
Keep cable away from the cutting area.
D
uring
operation the cable may be hidden in shrubs and can
be accidentally cut by the blade.
Additional Safety Recommendations
Work area safety
1. Never allow children or people unfamiliar with these
instructions to use the product. Local regulations may
restrict the age of the operator.
2. Only use the product in the manner and for the
functions described in these instructions.
3. The operator or user is responsible for accidents or
hazards occurring to other people or their property.
Electrical safety
1. The British Standards Institute recommend the use of
a Residual Current Device (R.C.D.) with a tripping
current of not more than 30mA. Even with a R.C.D.
installed 100% safety cannot be guaranteed and safe
working practice must be followed at all times. Check
your R.C.D. every time you use it.
2. Before use, examine the cable for signs of damage or
ageing. If the cable is found to be defective, take the
product to an Authorised Service Centre and have the
cable replaced.
3. Do not use the product if the electric cables are
damaged or worn.
4. Immediately disconnect from the mains electricity
supply if the cable is cut, or the insulation is damaged.
Do not touch the electric cable until the electrical
supply has been disconnected. Do not repair a cut or
damaged cable, replace it with a new one. If
replacement of the cable is necessary, this must only
be done by an Approved Service Centre in order to
avoid a safety hazard.
5. Your electric cable must be untangled, tangled cables
can overheat and reduce the efficiency of your
product
6. Always switch off at the mains before disconnecting
any plug, cable connector or extension cable.
7. Switch off, remove plug from mains and examine
electric supply cable for damage or ageing
before
winding cable for storage.
8. Always wind cable carefully, avoiding kinking.
9. Use only on AC mains supply voltage shown on the
product rating label.
10.Our products are double insulated to EN60745.
Under no circumstances should an earth be
connected to any part of the product.
Cables
If you want to use an extension cable when operating
your product, only the following cable dimentions should
be used.
- 1.0 mm
2
: max length 40 m
- 1.5 mm
2
: max length 60 m
- 2.5 mm
2
: max length 100 m
Minimum rating:
1.00mm
2
size cable 10 amps 250 volts AC
1. Mains cables and extensions are available from your
l
ocal Approved Service Centre.
2. Only use extension cables specifically designed for
outdoor use and which conform to one of the
following specifications: Ordinary rubber (60245 IEC
53), Ordinary PVC (60227 IEC 53) or Ordinary PCP
(60245 IEC 57)
3
. If the short connection lead is damaged, it must be
replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Personal safety
1. Always wear suitable clothing, gloves, and stout
s
hoes.
2
. Thoroughly inspect the area where the product is to
be used and remove all wires and other foreign
objects.
3. Before using the machine and after any impact, check
for signs of wear or damage and repair as necessary.
4. Always ensure the hand guard supplied is fitted
before using the hedge trimmer. Never attempt to use
an incomplete product or one with an unauthorised
modification.
Power tool use and care
1. Know how to stop the product quickly in an
emergency.
2. Never hold the product by the guard.
3. Never operate the product with damaged guards or
without guards in place.
4. Do not use stepladders whilst operating the product.
5. Remove the plug from the mains :-
- before leaving the product unattended for any period;
- before clearing a blockage;
- before checking, cleaning or working on the
appliance;
- if you hit an object. Do not use your product until you
are sure that the entire product is in a safe operating
condition;
- if the product starts to vibrate abnormally. Check
immediately. Excessive vibration can cause injury.
- before passing to another person.
Maintenance and storage
1. Keep all nuts, bolts and screws secure to be sure the
hedge trimmer is in safe working condition.
2. Replace worn or damaged parts for safety.
3. Be careful during adjustment of the product to prevent
entrapment of the fingers between moving blades and
fixed parts of the machine.
4.
Store in a cool dry place and out of reach of
children. Do not store outdoors.
5. Allow the product to cool for at least 30 minutes
before storing.
ENGLISH - 2
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flymo EasiCut 460 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flymo EasiCut 460 in the language / languages: All languages as an attachment in your email.

The manual is 4,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info