631058
46
Zoom out
Zoom in
Previous page
1/76
Next page
46 - English
6. MENU FUNCTIONS
Work hours 1
to set start and stop times for work hours 1. Enter each
required time in hours and minutes and press OK to
confirm the entered time.
Work hours 2:
to set start and stop times for work hours 2. Enter each
required time in hours and minutes and press OK to
confirm the entered time.
Work days
to select the days the robotic lawnmower must work.
The robotic lawnmower will work during the days that
are ticked off.
Reset timer
reset values to the factory settings.
To inactivate Work hours 1 or Work hours 2, enter the time
00:00 - 00:00 to reset the timer to --:-- - --:--.
A clock symbol is displayed on the start page when the timer
settings are set. The clock symbol is black when the robotic
lawnmower is not allowed to mow due to a timer setting and
it is white when the mower is allowed to mow.
The robotic lawnmower has an inbuilt standby period of
about 11 hours a day. The robotic lawnmower is parked in
the charging station during this period. See 4.2 Using the
timer on page 35.
6.4 Security
Through this selection, settings relating to security
and the connection between the mower and the
charging station can be made.
Change PIN code
Enter the new PIN code and press OK. Enter the same
code again and confirm by pressing OK. When the PIN
code is changed, a message stating that the PIN code
has been changed appears in the display momentarily.
Make a note of the new PIN code on the designated
line in Memo on page 4.
Security level
There are three security levels to choose from: low,
medium and high Low and medium security prohibits
access to the robotic lawnmower if the PIN code is
unknown. High security also includes a warning that
beeps if the correct PIN code is not entered after a
designated time period. To disable the robotic
lawnmower, press down the stop button and set the
main switch to 0.
Function Low Medium High
Time lock X X X
PIN request X X
Alarm X
Change PIN code
Security level
New loop signal
Timer
Installation
Security
Settings
Low
Medium
High
Change PIN code
Security level
New loop signal
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flymo 1200R - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flymo 1200R - 2015 in the language / languages: English as an attachment in your email.

The manual is 14,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info