733006
16
Zoom out
Zoom in
Previous page
1/39
Next page
12
Before any ride
Before any ride, check:
The lighting system is functional and firmly
attached. Safety-related functions are: The
front wheel headlight and the rear light
must generate sufficient light and the po-
sition light function must work after your
FLYER has come to a standstill.
Check the bell is functional and firmly at-
tached
Check the brakes are functional and firmly
attached and the wear of the brake pads
and brake surfaces. On the hydraulic sys-
tems: Check pipes & connections for leaks!
Check that the tire pressure is correct, tak-
ing note of the Tire and Tubes Chapter (12)
and the manufacturer information. These
are provided on the outside of the tire.
Check the tires for damage, intrusive ob-
jects and sufficient tread depth.
Check the wheels for true running and
damage
Check the wheels are firmly and correctly
attached using their fastening nuts or
quick-release fasteners.
8. Before any ride
Check your FLYER before any
ride, as functions may change
and parts may come loose after
assembly, brief parking in public places
or transport.
Check the gear system components for
function and firm attachment
Check all quick-release fasteners (also
after short, unsupervised parking in town,
etc.), screws and nuts are firmly attached
Check the frame and the fork for damage,
deformation and dents
Check the suspension elements are func-
tional and firmly attached
Check the handlebar, stem and seat are
firmly attached and correctly positioned
Do not ride if you are not con-
vinced that your FLYER is in a
technically flawless condition.
First have your FLYER checked and re-
paired by a specialist dealer. We rec-
ommend regular inspections by your
specialist dealer, particularly when you
use your FLYER intensively (for sports
or daily use). For inspection informa-
tion and intervals, see Chapter 23.1.
The safety-related components such
as frame, fork, wheel suspension and
brakes have a specific service life. Ex-
ceeding the service life can lead to un-
expected component failure. This may
in turn lead to falls and severe injuries.
9.1 Setting the seating position
You have to get the seat, handlebar and stem
adjusted to your body size and the desired
seating position to use your FLYER safely and
comfortably.
9. Rider-specific adjust-
ments
The pedals must be tightened
with an appropriate spanner,
usually a 15 mm open-end
spanner. Adhere to the correct fasten-
ing torque when tightening the pedals,
see Chapter 25.2, "Fastening torque for
screw connections".
Take care that the pedals are
screwed in straight. There is a risk
of breakage and falls when they are
screwed in crookedly!
Your FLYER has been carefully assembled by
your specialist dealer. If you detach the pedals,
for example for transport purposes, you must
take note that there is a right and a left pedal
during their re-installation. You can see from
the threads running in opposite directions
which pedal fits where. Usually there is also an
"R" embossed on the right and an "L" on the
left pedal. Screw the right pedal in a clockwise
direction and the left pedal in an anti-clock-
wise direction into the cranks.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flyer X serie 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flyer X serie 2014 in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Flyer X serie 2014

Flyer X serie 2014 User Manual - German - 39 pages

Flyer X serie 2014 User Manual - Dutch - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info