Manual Flyer Urban - Bosch 2016 (page 147 of 249) (English, German, Dutch, French, Italian, Norwegian)

780045

147

Zoom out

Zoom in

1/249

145

Get thorough instructions from your

FLYER specialist dealer and practise ch-

anging the wheels and tyres under their

supervision if you plan to repair your

own at tyres. The system must be swit-

ched off and the battery must be remo-

ved before changing a tyre or wheel.

You need the following equipment to repair a tire

puncture:

• Plastic tire lever

• Patches

• Rubber cement

• Sandpaper

• Open-ended spanner or wrench (for wheels

without quick release skewers)

• Air pump

• Spare tube

If your FLYER is equipped with a disc brake, you

can remove the wheel without further preparation.

Please note: when tting the wheel, the disk must

be slotted between the brake linings of the brake

calliper and ultimately be centred without contact.

If your bike is equipped with a hydraulic rim bra-

ke, you should proceed as follows:

• If your system features a brake quick release,

remove the brake unit according to the instruc-

tions supplied by your manufacturer.

• If you do not have a brake quick release, de-

ate all of the air out of the tyre.

In the case of back pedal brakes, the screws on

the brake arm of the chain stay have to be opened.

2. Removing the Wheel

• If your FLYER is equipped with a quick-release

lever or a thru axel, open them.

• If your FLYER has hex nuts, loosen these with

a suitable spanner anti-clockwise.

You can then remove the

front wheel according to

the steps listed above.

The following applies for rear wheels:

• If your FLYER uses a derailleur gear system,

change gear to the smallest sprocket. In this

position, the rear derailleur poses the least hin-

drance in removing the wheel.

• If your FLYER is equipped with a quick-release

lever or a thru axel, open them.

• If your bicycle has hexagonal bolts, then loos-

en them in anti-clockwise direction with a tting

ring spanner or box-end wrench.

• Pull the rear derailleur backwards somewhat.

• Lift the bicycle slightly.

• Lightly strike the wheel from above with the

palm of the hand.

• Take the wheel out of the frame.

Source: Shimano® techdocs

If your FLYER has a gear hub, please consult the

instructions supplied by your manufacturer for re-

moving the wheel.

Types of valve on bicycle tubes

3. Removing the tyre and inner tube

• Unscrew the valve cap, the fastening nut and

possibly the cap nut from the valve.

• Release all of the remaining air from the inner

tube.

• Insert the tyre lever opposite the valve on the

inside of the tyre.

• Insert the second tyre lever approx. 10 cm from

the rst, between the rim and tyre. Lift the tyre

wall over the edge of the rim.

• Repeat this lifting action around the wheel until

the entire tyre is free.

• Remove the inner tube from the tyre.

4. Change the inner tube

Switch the inner tube for an intact one.

Tubular tires and tubeless tires must be

changed according to the tires and rims’

manufacturer’s instructions.

5. Reassembling the tyre and inner tube

Please avoid allowing foreign bodies inside

the tyre. Ensure that the inner tube does

not have any folds and is not squashed.

Ensure that the rim tape covers all spoke

nipples and does not have any damage.

Schrader valve

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Urban - Bosch 2016 in the language / languages: English, German, Dutch, French, Italian, Norwegian as an attachment in your email.

The manual is 9.39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Flyer Urban - Bosch 2016 Manual

Product: