Manual Flyer Urban - Bosch 2016 (page 140 of 249) (English, German, Dutch, French, Italian, Norwegian)

780045

140

Zoom out

Zoom in

1/249

138

opposite directions. Usually, an “R” is embossed

on the right pedal with an “L” on the left. Screw

the right pedal clockwise and the left pedal anti-

clockwise into the cranks.

The pedals must be fastened with a suit-

able spanner. Adhere to the correct fas-

tening torque when screwing on the ped-

als, see Chapter 23.2 “Fastening torques

for screw connections”. Ensure that the

pedals are tted straight. If they are tted

at an angle, there is a danger of break-

ing and of having a fall!

We advise against the use of pedals with

hooks and straps.

Ensure that you have read the manufac-

turer‘s instructions before using magnet-

ic or clipless pedals. Practise clipping

your shoes in and out of the pedals‘ lock-

ing system before your rst ride in a qui-

et, safe place. Clipless pedals which do

not properly release are a safety hazard.

The release force of system pedals can

be adjusted. Please test this on your rst

ride with a setting that releases easily.

Regularly clean the system pedals and

service them with a suitable lubricant.

11.1 Operating quick releases and

axles

The wheels, seat post, seat, stem and handlebars

may be attached with quick release fasteners,

quick release axles or screw connections.

Only allow your FLYER specialist re-

tailer to perform work on quick release

fasteners and quick release axles.

These are components which are cru-

cial for your safety, so incorrect work

and tools in this area of the bicycle

could lead to serious falls.

Quick release

Quick releases are clamping brackets which at-

tach components like a screw, however their

clamping force stems from tightening the lever

without tools. The clamping force is activated by

opening and closing the lever. The clamping force

is adjusted by turning the counter nut when the

lever is open.

1. In order to open a quick release, to adjust

the seat post for example, open the quick

release lever.

2. Now you can move and adjust the seat post.

3. The quick release fastener must be closed

before using the FLYER. Completely

fold down the quick release lever for that

purpose. Fully engage any possible safety

devices.

The quick release is only securely

closed when you need the power of the

ball of your hand to close the lever.

The adjustment nut of the quick release fastener

must be tightened when the tightening force is not

high enough, e.g. when the seat does not stay in

position. To do this, the quick release lever must

be open.

The quick release fastener cannot be closed

when the tightening force is too high. Open the

clamping lever in this case and slightly loosen the

adjustment nut.

• All quick release skewers must be

rmly closed before you set off.

• Check all quick release fasteners for

correct attachment if the vehicle was

parked for a short time without super-

vision and before every ride.

• A closed quick release fastener must

be folded close to the frame, fork or

seat post.

Lock down wheels or other parts of your

vehicle that are attached with quick release

fasteners when you park your bicycle.

Quick release axles

The current chassis is either equipped with quick

release fasteners, screw connectors or quick re-

lease axles that work in the same way as quick

release fasteners:

The axle is screwed into the dropout and holds the

hub between the fork legs. The hub and the axle

are fastened with a quick release lever. Systems

in which the axle is only inserted or screwed in

Tightening the Adjusting

Nut

Loosening the Adjusting

Nut

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Urban - Bosch 2016 in the language / languages: English, German, Dutch, French, Italian, Norwegian as an attachment in your email.

The manual is 9.39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Flyer Urban - Bosch 2016 Manual

Product: