803520
191
Zoom out
Zoom in
Previous page
1/260
Next page
185
DE
13.3.2 Inserting/removing the
battery from the side
i
Important: Depending on the
model, lock the battery to the e-bike
with a battery lock (including a key)
or with a screw connection. The tool
for loosening or tightening the screw
connection is stored by magnetic
holder on the rear wheel axle when
not in use.
22 Rear hub 36 Screwdriver tool
36
22
Fig.11: Screwdriver tool for battery on rear wheel axle
Inserting the battery
1. Insert the battery into the lower holder on
the e-bike and then swing the upper part of
the battery into its holder until the battery
lock audibly engages in the upper holder.
2. Make sure that the battery is securely
seated in its holder.
3. Lock the battery to the e-bike by using the
key to lock the battery lock or the screw-
driver tool to tighten the screw connection.
Then remove the key or the screw-
driver tool.
Removing the battery
i
Important: Make sure you have set
the desired charging mode in the
Settings menu or change it before
removing the battery. You cannot
change the charging mode on the
removed battery during charging.
1. Switch off the electric drive system.
To do so, press the On/Off button on
the display.
2. Unlock the battery on the e-bike by open-
ing the battery lock with the key or loosen-
ing the screw connection with the screw-
driver tool.
i
Important: Depending on the
model, the battery must be released
from its lock in the holder before it
can be removed. To do so, press the
tab on the upper end of the battery.
3. Secure the battery with one hand to pre-
vent it from falling, release the lock if nec-
essary and remove the battery from its
holder on the e-bike to the side.
i
Important: To charge the battery,
follow the instructions in the manu-
facturer's manual for your electric
drive.
35
34
31
33 32
5
37
31
36
5
5Down tube 34 Upper holder
31 Battery 35 Lower holder
32 Battery lock 36 Screwdriver tool
33 Key 37 Thread
Fig.12: Inserting/removing the battery from the side
191


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flyer Upstreet2 2024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Upstreet2 2024 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 32.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info