Manual Flyer Tour - Panasonic 2018 (page 172 of 224) (English, German, Dutch, French, Italian)

780034

172

Zoom out

Zoom in

1/224

170 171

21. Electrical motor

All information, data and instructions concerning

the electrical system of your FLYER e-bike are

included in the attached operating instructions

for the electrical support system installed in your

FLYER. They include details of the operation and

maintenance, all important safety instructions and

information concerning the following components:

• Operating element and display

• Battery and possible ranges

• Charger

• Drive unit

• Speed sensor and spoke magnet

Some general facts concerning the function and

range of your FLYER's motor are listed below:

Function:

The motor starts working as soon as you start

pedalling when one of the support modes has

been selected.

The performance of the motor depends on sev-

eral factors:

• The force used while pedalling

The support is more gentle when you pedal

with low force than when you pedal with higher

force, e.g. while driving uphill. However, this in-

creases the power consumption and decreas-

es the range.

• Support mode

The higher the level of support, the more pow-

er the motor will provide. However, high motor

performance means high power consumption.

The lowest support mode provides the least

support but also the longest range.

Range

Specied range information has been obtained

under optimal conditions. Ranges achieved un-

der everyday conditions will usually be shorter.

Please consider this when planning your route.

The range depends on many factors. These in-

clude battery capacity, motor support level select-

ed, geographical conditions, road surface, driving

style, environmental temperature, the weight of

the driver, tyre pressure and the technical state of

your FLYER e-bike.

Driving without drive support

You can also drive your FLYER without drive sup-

port by selecting the “No assist” support mode.

Ensure that your system is always switched on.

Never drive without a battery or with

your system switched off, as the func-

tions of the operating unit and the light-

ing functions are not available in this

case.

Always remove the battery before clean-

ing, maintaining or repairing your e-bike.

Ensure that you do not touch and thus

possibly connect contacts when clean-

ing or maintaining the battery. You risk

being hurt and the battery may suffer

damage if the contacts are live.

Do not use a high pressure water stream

or a high pressure cleaner on your bike.

The cleaning liquid may enter sealed

bearings due to high pressure, dilute

the lubricant and increase friction. As a

result, rust is formed which destroys the

bearings. Cleaning with a high-pressure

cleaner may damage the electrical sys-

tem.

You should avoid doing the following

when cleaning your FLYER e-bike:

• Acids

• Fats

• Oil

• Brake cleaner (only to use on brake

discs)

• Solvent-based liquids.

These damage the surfaces and contrib-

ute to wear on the FLYER.

After use, ensure that you dispose of the

lubricant, cleaning and care products in

an environmentally friendly way. These

substances do not belong in domestic

waste, in the drain or in natural environ-

ments.

Smooth operation and durability of your

FLYER e-bike depend on appropriate

maintenance and care for your FLYER.

• Regularly clean your FLYER with

warm water, small amounts of clean-

ing agent and a sponge.

• While cleaning the FLYER, always

check your e-bike for cracks, notches

or material deformities.

• Damaged parts must be changed with

original spare parts. Please only ride

your FLYER again after this check

has been carried out.

• Have possible paint damage removed

by your FLYER specialist retailer.

Further important information concerning care for

your FLYER e-bike is provided on the website of

your respective component manufacturer.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Tour - Panasonic 2018 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7.78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Flyer Tour - Panasonic 2018 Manual

Product: