780034

Flyer Tour - Panasonic 2018 Manual

150
Zoom out
Zoom in
Previous page
1/224
Next page
148 149
4. Pull out the axle
11.2 Setting up the seating position
The seat, handlebars and stem must be adjusted
to your body mass and the desired sitting positon
in order to use your FLYER safely and comfortably.
Only allow FLYER specialists to work on
your handlebars and stem. These are
components which are crucial for your
safety, so incorrect work and tools in this
area of the bicycle could lead to serious
falls.
The seat and stem can be attached with
screw connections or quick releases. Al-
ways secure screw connections with the
correct torque, see “Technical data”.
Seat height
In order to transfer the pedal force effectively to
the pedals, you must set your seat to the appro-
priate height.
Find the ideal position by sitting on the FLYER
and placing the heel of your foot onto the pedal in
its lowest position.
90° arm-upper body angle
Now the bottom leg should be stretched. If this
is not the case, dismount, adjust the seat in the
required direction and try again.
Ensure that the quick release fastener is com-
pletely closed after the adjustment process.
There are markings on the seat post
which show how far it can be pulled out
of the frame. Never pull the seat post be-
yond the maximum length marking. Oth-
erwise the seat post may buckle or
break. If you require a longer seat post
to reach the correct sitting position, talk
to your FLYER specialist retailer. Never
ride with a seat post extended further
than the maximum marker as this could
result in serious falls and injury.
Children and persons who are not con -
dent cyclists should be able to touch the
ground with the tips of both feet. Other-
wise, when stopping they run the risk of
falling and suffering serious injury.
Seat position
The horizontal position of the seat can and should
be set too.
You are in the optimal driving positon when your
front knee is directly above the pedal while the
crank is horizontally aligned.
The horizontal adjustment of the seat may only
be performed within the markers and within the
range speci ed by the manufacturer.
Test whether the seat post and the seat
are rmly attached before you drive off.
To do this, hold the seat at the front and
back and attempt to turn it. It should not
move.
Height of the handlebars
Once the seat has been rmly and comfortably
positioned, the handlebars must be adjusted to
your needs.
An effective starting position for relaxed riding is
offered by a seating position in which the upper
body and arm form a 90° angle.
In order to change the height of the handlebars,
the height of the stem must be adjusted.
min.
7.5 cm
STOP
… 150 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flyer Tour - Panasonic 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Tour - Panasonic 2018 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info