732994
170
Zoom out
Zoom in
Previous page
1/275
Next page
168
Never drive without a battery or with
your system switched off, as the func
-
tions of the operating unit and the light-
ing functions are not available in this
case.
Always remove the battery before clean-
ing, maintaining or repairing your e-bike.
Ensure that you do not touch and thus
possibly connect contacts when clean
-
ing or maintaining the battery. You risk
being hurt and the battery may suffer
damage if the contacts are live.
Do not use a high pressure water stream
or a high pressure cleaner on your bike.
The cleaning liquid may enter sealed
bearings due to high pressure, dilute
the lubricant and increase friction. As a
result, rust is formed which destroys the
bearings. Cleaning with a high-pressure
cleaner may damage the electrical sys
-
tem.
You should avoid doing the following
when cleaning your FLYER e-bike:
Acids
Fats
Oil
Brake cleaner (only to use on brake
discs)
Solvent-based liquids.
These damage the surfaces and contrib
-
ute to wear on the FLYER.
After use, ensure that you dispose of the
lubricant, cleaning and care products in
an environmentally friendly way. These
substances do not belong in domestic
waste, in the drain or in natural environ
-
ments.
Smooth operation and durability of your
FLYER e-bike depend on appropriate
maintenance and care for your FLYER.
Regularly clean your FLYER with
warm water, small amounts of clean
-
ing agent and a sponge.
While cleaning the FLYER, always
check your e-bike for cracks, notches
or material deformities.
Damaged parts must be changed with
original spare parts. Please only ride
your FLYER again after this check
has been carried out.
Have possible paint damage removed
by your FLYER specialist retailer.
Further important information concerning care for
your FLYER e-bike is provided on the website of
your respective component manufacturer.
21. Electrical motor
All information, data and instructions concerning
the electrical system of your FLYER e-bike are
included in the attached operating instructions
for the electrical support system installed in your
FLYER. They include details of the operation and
maintenance, all important safety instructions and
information concerning the following components:
Operating element and display
Battery and possible ranges
Charger
Drive unit
Speed sensor and spoke magnet
Some general facts concerning the function and
range of your FLYER's motor are listed below:
Function:
The motor starts working as soon as you start
pedalling when one of the support modes has
been selected.
The performance of the motor depends on sev
-
eral factors:
The force used while pedalling
The support is more gentle when you pedal
with low force than when you pedal with higher
force, e.g. while driving uphill. However, this in
-
creases the power consumption and decreas-
es the range.
Support mode
The higher the level of support, the more pow
-
er the motor will provide. However, high motor
performance means high power consumption.
The lowest support mode provides the least
support but also the longest range.
Range
Specied range information has been obtained
under optimal conditions. Ranges achieved un
-
der everyday conditions will usually be shorter.
Please consider this when planning your route.
The range depends on many factors. These in
-
clude battery capacity, motor support level select-
ed, geographical conditions, road surface, driving
style, environmental temperature, the weight of
the driver, tyre pressure and the technical state of
your FLYER e-bike.
Driving without drive support
You can also drive your FLYER without drive sup
-
port by selecting the “No assist” support mode.
Ensure that your system is always switched on.
170


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flyer RS serie - Panasonic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flyer RS serie - Panasonic in the language / languages: English, German, Dutch, French, Italian, Norwegian as an attachment in your email.

The manual is 11,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Flyer RS serie - Panasonic

Flyer RS serie - Panasonic User Manual - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info