732994
150
Zoom out
Zoom in
Previous page
1/275
Next page
148
Turning back the handlebars: Lift the unlocking
bolt (1).
Then turn the handlebars back to the driving posi-
tion (2). The bolt must be re-latched (3).
Completely close the quick release lever (4).
The Speedlifter quick release lever must
be completely closed during the ride, just
like any other quick release fastener. It
must also be ensured that the unlocking
bolt is latched in the front hole. Never ad-
just the handlebars while riding.
Read the instructions of the component
manufacturer and for more information
visit: www.speedlifter.com.
Adjusting the stem
For detailed information, please read the
instructions supplied by the manufactur-
er. Only allow FLYER specialists to work
on your handlebars and stem.
1
3
2
90°
4
The following stem types are installed on FLYERS:
A head stem
Adjustable stem
The incline of the stem can be adjusted to your
requirements. The lateral fastening screw must
be loosened and retightened with the correct fas-
tening torque after adjustment
Adjusting the bike’s stem angle.
To adjust the bike’s stem angle and with it the po-
sition of the handlebar, unscrew the top 3 Allen
screws with a few rotations. Do not completely
unscrew the screws.
At this point, you should be able to adjust the
stem to its right angle. Having done that, tighten
the Allen screws back with the prescribed tighten-
ing torque.
Changing the position of the stem also
changes the position of the handlebars.
You should always be able to safely
reach and use grips and controls. Han-
dles with a pronounced wing shape may
need to be repositioned.
Make sure that all cables and leads have
a suf cient length to allow for all possi-
ble steering movements when changing
the handlebar and stem position.
11.3 Setting up the brake levers
The brake levers should be set up so
that your hands can safely and comfort-
ably apply them as a straight extension
of your arms.
Adjusting the bike’s
stem angle.
Stem mounting
* see Chapter 24.2
150


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flyer RS serie - Panasonic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flyer RS serie - Panasonic in the language / languages: English, German, Dutch, French, Italian, Norwegian as an attachment in your email.

The manual is 11,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Flyer RS serie - Panasonic

Flyer RS serie - Panasonic User Manual - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info