733021
206
Zoom out
Zoom in
Previous page
1/264
Next page
204
When transporting the e-bike by car, the
battery must be removed and transport
-
ed separately.
Make sure that the battery’s contacts
are safe from short circuiting.
The motor and electrical components
must be covered for transporting to
avoid any moisture penetration.
The driver is responsible for transport by car in
compliance with the applicable laws and regula
-
tions. Biketec AG cannot be held liable in connec-
tion with the transportation of the FLYER on roof
or rear carriers.
Public transport
Obtain information regarding the local regulations
when you intend to transport your e-bike on public
transportation.
Aircraft
Obtain information regarding the legal guidelines
if you intend to transport your FLYER by aircraft.
Ask your airline.
17. Electrical motor
All information, data and instructions concerning
the electrical system of your FLYER e-bike are
included in the attached operating instructions
for the electrical support system installed in your
FLYER. They include details of the operation and
maintenance, all important safety instructions
and information concerning the following compo
-
nents:
Operating element and display
Battery and possible ranges
Charger
Drive unit
Speed sensor and spoke magnet
Some general facts concerning the function and
range of your FLYER's motor are listed below:
Function:
The motor starts working as soon as you start
pedalling when one of the support modes has
been selected. The performance of the motor de
-
pends on several factors:
The power applied when pedalling
If you pedal with less power, you are provided
with less support than when you your increase
your pedalling power, i.e. when riding uphill.
However, this increases the power consumption
and decreases the range.
Support mode
The higher the level of support, the more power
the motor will provide. However, high motor per
-
formance means high power consumption. The
lowest support mode provides the least support
but also the longest range.
Range
Specied range information has been obtained
under optimal conditions. Ranges achieved un
-
der everyday conditions will usually be shorter.
Please consider this when planning your route.
The range depends on many factors. These in
-
clude battery capacity, motor support level select-
ed, geographical conditions, road surface, driving
style, environmental temperature, the weight of
the driver, tyre pressure and the technical state of
your FLYER e-bike.
Driving without drive support
You can also drive your FLYER without drive sup
-
port by selecting the «OFF» support mode. En-
sure that your system is always switched on.
Never drive without a battery or with your
system switched off, as the functions of
the operating unit and the lighting func
-
tions are not available in this case.
1. Always remove the battery before
cleaning, maintaining or repairing
your e-bike. Ensure that you do not
touch and thus possibly connect
contacts when cleaning or maintain
-
ing the battery. You risk being hurt
and the battery may suffer damage
if the contacts are live. Do not use
a high pressure water stream or a
high pressure cleaner on your bike.
The cleaning liquid may enter sealed
bearings due to high pressure, dilute
the lubricant and increase friction. As
a result, rust is formed which destroys
the bearings. Cleaning with a high-
pressure cleaner may damage the
electrical system.
2. When cleaning your FLYER
e-bike, you should never apply acids,
grease, oils, brake cleaners (with ex
-
ception to the brake discs), and liq-
uids containing solvents.
These damage the surfaces and contrib
-
ute to wear on the FLYER.
After use, ensure that you dispose of the
lubricant, cleaning and care products in
an environmentally friendly way. These
substances do not belong in domestic
waste, in the drain or in natural environ
-
ments. Smooth operation and durability
of your FLYER e-bike depend on ap
-
propriate maintenance and care for your
FLYER.
206


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flyer Mountain - Bosch 2019 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Mountain - Bosch 2019 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info