733021
190
Zoom out
Zoom in
Previous page
1/264
Next page
188
3. Ensure that you have read the manu
-
facturer‘s instructions before using
magnetic or clipless pedals. Practise
clipping your shoes in and out of the
pedals‘ locking system before your
rst ride in a quiet, safe place. Clip
-
less pedals which do not properly re-
lease are a safety hazard.
The release force of system pedals can
be adjusted. Please test this on your rst
ride with a setting that releases easily.
Regularly clean the system pedals and
service them with a suitable lubricant.
11.1 Operating quick releases and
axles
The wheels, seat post, seat, stem and handlebars
may be attached with quick release fasteners,
quick release axles or screw connections.
Only allow your FLYER specialist retailer
to perform work on quick release fasteners
and quick release axles. These are com
-
ponents which are crucial for your safety,
so incorrect work and tools in this area of
the bicycle could lead to serious falls.
Quick release
Quick releases are clamping brackets which at
-
tach components like a screw, however their
clamping force stems from tightening the lever
without tools. The clamping force is activated by
closing the lever. The clamping force is adjusted
by turning the counter nut when the lever is open.
1. In order to open a quick release, to adjust the
seat post for example, open the quick release
lever.
2. Now you can move and adjust the seat post.
3. The quick release fastener must be closed be
-
fore using the FLYER. Completely fold down
the quick release lever for that purpose. Fully
engage any possible quick release levers.
The quick release is only securely
closed when you need the power of the
ball of your hand to close the lever.
The adjustment nut of the quick release fastener
must be tightened when the tightening force is not
high enough, e.g. when the seat does not stay in
position. To do this, the quick release lever must
be open.
Tightening the Adjusting Nut
The quick release fastener cannot be closed
when the tightening force is too high. Open the
clamping lever in this case and slightly loosen the
adjustment nut.
1. All quick release skewers must be
rmly closed before you set off.
2. Check all quick release fasteners for
correct attachment if the vehicle was
parked even for a short time without
supervision and before every ride.
Loosening the Adjusting Nut
190


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flyer Mountain - Bosch 2019 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Mountain - Bosch 2019 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info