803514

Flyer Gotour6 2024 Manual

207
Zoom out
Zoom in
Previous page
1/260
Next page
201
DE
21 Quick releases
Quick releases are clamps that fix com-
ponents like a screw, but whose clamping
force is applied by flipping a lever without
tools. The clamping force is activated by
opening and closing the lever. The clamp-
ing force is adjusted by turning the locknut
when the lever is open.
Your e-bike may have quick releases for
attaching the wheel set, seat post, saddle,
stem or handlebars.
• To open a clamp, open the quick-release
lever.
• To close the open clamp again, fold down
the quick-release lever completely.
In the closed state, the quick-release
lever must lie tightly or maximally on the
associated component (frame, fork, seat
post, etc.)!
• If the clamping force is not high enough,
you must tighten the adjusting nut on the
quick release. The clamping lever must
be open for this purpose.
• If the clamping force is too high and you
cannot close the quick release, you must
open the clamping lever and loosen the
adjusting nut a little.
i
Important: Have work on quick-re-
leases carried out by a FLYER spe-
cialist dealer only. These components
are safety-related components; faulty
work and incorrect tools can result in
serious falls.
22 Quick-release axles
In the current frameset, quick-release axles
can also be used instead of quick releases
or bolts to attach the wheel set.
Quick-release axles work similarly to quick
releases: The quick-release axle is screwed
into the dropout and holds the hub between the
two fork legs. The hub and axle are clamped
with the quick-release lever, which is operated
like a quick release. There are also systems
where the axle is only inserted or screwed in
and then fixed with a screw connection.
i
Important: Follow the manufactur-
er's instructions for your quick-re-
lease axle and have a FLYER spe-
cialist dealer explain the system to
you in detail.
i
Important: Have work on quick-re-
lease axles carried out by a FLYER
specialist dealer only. These com-
ponents are safety-related compo-
nents; faulty work and incorrect
tools can result in serious falls.
23 Lights
The energy for the lighting system of your
e-bike is supplied by the battery of the elec-
tric drive system.
i
Important: When the battery is
empty, the light function is still guar-
anteed for about one hour.
• To operate the lighting components on
your e-bike, follow the manufacturer's
instructions for your electric drive.
• Should malfunctions occur, have the light-
ing system checked by a FLYER special-
ist dealer and replaced if necessary.
i
Important: Not every FLYER e-bike
is equipped with the required light-
ing components upon delivery in
order to be approved for participa-
tion in road traffic.
• Have the required equipment (lights,
reflectors, etc.) retrofitted by your FLYER
specialist dealer if you wish to use your
e-bike in public road traffic.
Headlight
The headlight must be aligned so that the
road is illuminated according to the legal
requirements of your country.
Reflectors
Observe the following points when attaching
the reflectors:
• Ensure that the reflectors are mounted
correctly and that the reflectors are not
obscured by other components, clothing
or accessories.
… 207 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flyer Gotour6 2024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Gotour6 2024 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 32.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info