Manual Flyer Gotour6 2024 (page 192 of 260) (English, German, Dutch, French, Italian)

803514

192

Zoom out

Zoom in

1/260

186

13.3.3 Inserting/removing the

battery from below

Important: Depending on the

model, lock the battery to the e-bike

with a battery lock (including a key)

or with a screw connection. The tool

for loosening or tightening the screw

connection is stored by magnetic

holder on the rear wheel axle when

not in use.

22 Rear hub 36 Screwdriver tool

Fig.13: Screwdriver tool for battery on rear wheel axle

Important: The battery should be

removed or inserted using an

assembly stand. Alternatively, if

there is no assembly stand availa-

ble, the e-bike can be carefully pla-

ced on its side. When placed on its

side, the e-bike should be on a level

surface and tilted towards the non-

drive side. Take care not to damage

any components when putting the

e-bike on its side. Only place the

e-bike on a soft surface.

Inserting the battery with the assembly

stand

1. To insert the battery, place the battery in

the lower holder of the frame with the con-

tacts and the discharge plug facing up.

2. Push the battery into the down tube until

you feel resistance.

3. Keep holding the battery firmly, insert the

locking pin and tighten the screw connec-

tion using the screwdriving tool.

Inserting the battery – lateral ground

position

1. To insert the battery, place the battery

in the lower holder of the frame with the

contacts and the discharge plug facing

up.

2. Push the battery approx. three-quarters

into the down tube.

3. Hold the battery firmly and bring the

e-bike into an upright position by lifting it

using the side strut. Now slide the battery

completely into the down tube until you

feel some resistance.

4. Insert the locking pin and tighten the

screw connection using the screwdriving

tool.

5Down tube 36 Screwdriver tool

31 Battery 37 Thread

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Gotour6 2024 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 32.22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Flyer Gotour6 2024 Manual

Product: