Manual Flyer GOROC X 2022 (page 301 of 389) (English, German, Dutch, French, Italian)

803523

301

Zoom out

Zoom in

1/389

If your FLYER is equipped with a discbrake, you

can remove the wheel without further preparation.

Pleasenote:whenttingthewheel,thediscmust

be slotted between the brake linings of the brake

calliper and ultimately be centred without contact.

Removingthewheel

Frontwheel

If your bicycle has quick-re-

lease fasteners or axles,

open them.

If your bicycle has hexago-

nal bolts, then loosen them

in anti-clockwise direction

withattingringspannerorbox-endwrench.

You can then remove the front wheel according to

the steps listed above.

Rearwheel

If your bicycle uses a derailleur gear system,

change gear to the smallest sprocket. In this posi-

tion, the rear derailleur poses the least hindrance

in removing the wheel.

If your bicycle has quick-release fasteners or ax-

les, open them.

If your bicycle has hexagonal bolts, then loosen

theminanti-clockwisedirectionwithattingring

spanner or box-end wrench.

Pull the rear derailleur backwards a little.

Lift the bicycle slightly.

Lightly strike the wheel from above with the palm

of the hand. Take the wheel out of the frame.

Removingthetyreandinnertube

• Unscrew the valve cap, the fastening nut and

possibly the cap nut from the valve.

• Release all of the remaining air from the inner

tube.

• Insert the tyre lever opposite the valve on the

inside of the tyre.

• Insert the second tyre lever approx. 10 cm from

therst,betweentherimandtyre.Liftthetyre

wall over the edge of the rim.

• Repeat this lifting action around the wheel until

the entire tyre is free.

• Remove the inner tube from the tyre.

Changingtheinnertube

Switchtheinnertubeforanintactone.

Tyres with and without tubes must be

changed according to the instructions of

the tyre and/or rim manufacturer.

Quelle: Shimano

techdocs

Reassemblingthetyreandinnertube

Do not allow foreign bodies to get inside the tyre.

Ensure that the inner tube does not have any

folds and is not squashed.

Ensure that the rim tape covers all spoke nipples

and does not have any damage.

• Place one edge of the rim into the tyre.

• Push one side of the tyre completely into the

rim.

• Insert the valve through the valve hole in the

rim and put the inner tube into the tyre.

• Pull the second side of the tyre into the rim with

the balls of your hands.

• Ensure that the inner tube is correctly posi-

tioned.

• Pump the inner tube up a little.

• Check that the tyre is properly in place and

runs true using the control ring on the side of

the tyre. Adjust the positioning of the tyre with

your hand if it does not quite run true.

• Pump the inner tube up to the recommended

tyre pressure.

Please take note of the running direction

of the tyre when installing it.

Reattachingthewheel

Reattach the wheel securely back in the frame or

fork with the quick-release fastener or axle.

If your bicycle has disc brakes, please

ensure that the brake discs are correctly

secured between the brake pads!

Read the gear manufacturer‘s instructions to cor-

rectly and safely assemble and set up derailleur

gear systems, hub gears and combined hub and

derailleur gear systems.

Tighten all screws to the recommended

torque. Failing to do so could cause the

screws to be torn out and components to

come apart.

Test the brakes.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Flyer GOROC X 2022 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 19.6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Flyer GOROC X 2022 Manual

Product: