624064

Fluke networks TS23 PRO Manual

12
Zoom out
Zoom in
Previous page
1/22
Next page
8
TS23 PRO Test Set
Users Guide
s
The speaker key turns the speaker on the back of the test set on and off. It operates in both
Talk and Monitor modes.
In Monitor mode when you use the test set as a handset, press
s to turn on the speaker
so you can monitor a line while you work at a distance from the test set. In Monitor mode,
the speaker has 2 volume levels. To adjust the volume, press
v.
When the test set is off-hook and you use it as a handset, press
s to turn on the
speakerphone. The handset microphone and receiver turn off and the speakerphone
microphone and speaker turn on. You can use this mode for hands-free conversation. In
Talk mode, the speaker has 8 volume levels. To adjust the volume, press
v.
You can also set the test set to operate only in Receive-Only Loud Speaker mode (see "Make
Receive-Only Loud Speaker Mode the Default" on page 12 ). In this mode, if the test set is
off-hook and you use it as a handset, pressing
s turns on the speaker, but not the
speakerphone microphone. Receive-Only Loud Speaker mode lets you listen to the line,
hands-free.
The speaker stays on until you turn it off or until the test set turns off.
O
To turn on the test set, press Q. To switch between Monitor mode and Talk mode, press
P or Q. To turn off the test set, hold down Q for 3 seconds. See "How to Use the
Monitor and Talk Modes" on page 9.
r
The r key recalls telephone numbers. See "Program Speed Dialing Numbers" on page 11.
l
The l key redials the last number you dialed since you turned on the test set. See "Last
Number Redial (LNR)" on page 11.
S
The S key lets you store numbers for the speed dial function. See "Program Speed Dialing
Numbers" on page 11. The key lets you set the default mode for the speakerphone to
receive-only mode. See "Make Receive-Only Loud Speaker Mode the Default" on page 12.
V
When the test set is in Monitor mode, you can press this key to do a test for dc voltage. In
Talk mode, it does a test for loop current. The VDC and mA LEDs show the range of voltage
or current on the line. See Table 1 on page 5.
T
When the test set is off hook, you can press T to change the test set to pulse dial or tone
dial mode. When the test set goes off hook, it is always in tone dial mode.
Table 2. Keys (continued)
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke networks TS23 PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke networks TS23 PRO in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info