624063

Fluke networks TS22 Series Manual

11
Zoom out
Zoom in
Previous page
1/16
Next page
7
Operation
Operation
TS22 Amplified Speaker Mode
To put the TS22 Test Set into amplified speaker mode:
1
Connect the test set to a line. The TALK/MONITOR
switch may be in either position.
2
Press the SPEAKER button once to enter amplified
speaker mode with low volume.
3
Press the SPEAKER button a second and third time
for medium and high volume.
4
Press the SPEAKER button a fourth time to turn
the amplified speaker off.
Pressing the MUTE button while in amplified speaker
mode turns the speaker off.
TS22A Speakerphone Mode
To put the TS22A Test Set into speakerphone mode:
1
Connect the test set to a line. Set the TALK/
MONITOR switch to T.
2
Press the SPEAKER button once to enter
speakerphone mode with low volume.
3
Press the SPEAKER button a second and third time
for medium and high volume.
4
Press the SPEAKER button a fourth time to turn
the speakerphone off and return to Talk mode.
Pressing the MUTE button while in speakerphone
mode mutes the speakerphone microphone for
privacy.
TS22A Speaker Monitor Mode
To put the TS22A Test Set into speaker monitor mode:
1
Set the TALK/MONITOR switch to M, then press
the SPEAKER button once to enter speaker mode
with low volume.
2
Press the SPEAKER button a second and third time
for medium and high volume.
3
Press the SPEAKER button a fourth time for off
and return to Monitor mode.
Selecting a Dial Signal
Select the type of dial signaling required, DTMF or dial
pulse, with the TONE/PULSE switch:
1
Set the TALK/MONITOR switch to M.
2
Connect test set to the line; listen to verify that the
line is idle.
3
Set the TALK/MONITOR switch to T, and verify that
dial tone is received.
4
Enter the number to be called. If DTMF signaling
has been selected, the tones associated with each
digit are generated as each key is pressed. If rotary
dial pulse signaling has been selected, the number
may be entered at any rate on the keypad; digits
will automatically be pulsed out at the correct
rate.
To terminate the call, either during or after dialing,
return the TALK/MONITOR switch to the M position.
Last Number Redial
Note
When dialing out through a PBX, you may use
the PSE key to insert a pause before initially
dialing the number. See “Putting a Pause in a
Stored Number”.
In the Tone or Pulse mode, the last number dialed can
be automatically redialed by pressing the LNR key after
going on-hook and then back off-hook.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke networks TS22 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke networks TS22 Series in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info