624069
26
Zoom out
Zoom in
Previous page
1/36
Next page
LinkRunner AT 1000/2000 Network Auto-Tester
Users Manual
18
General Configuration:
Cable Length Unit, Meters
Auto Shutoff, Enabled
Set Language:
English
When you Select Restore Factory Defaults, you will be
prompted with a two popup. Select
OK, then press L.
The restore will be completed and the tester will turn off.
Firmware Update
1
Download the LinkRunner firmware update file from
the Fluke Networks website, or contact Fluke Networks
to get the update by other means. Save the file to your
hard disk.
2
Get the latest version of LinkRunner Manager from the
Fluke Networks website.
3
Start LinkRunner Manager on your PC.
4
Turn on the tester.
5
Select Tools > Firmware Update > select
Update.
6
Use the USB cable supplied with the tester to connect
the tester to the PC.
7
In LinkRunner Manager, select LinkRunner > Update
Software.
8
Click Select, find and select the update file (.zip
extension), then click Select.
9
Click Update.
10
When the transfer is completed, disconnect the USB
cable from the tester.
11
The screen on the tester goes blank while it installs the
update file. When the update is completed, restart the
tester.
WCaution
Do not disconnect the LinkRunner from the PC or
remove the battery during the update.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke networks LinkRunner AT 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke networks LinkRunner AT 2000 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info