624068

Fluke networks LinkRunner AT 1000 Manual

27
Zoom out
Zoom in
Previous page
1/36
Next page
Using AutoTest, Switch, and Cable Test
19
Transfer Saved Profiles to/from LinkRunner
Manager
Use LinkRunner Manager to view and configure the profiles
that are saved on the tester. To transfer profiles from the
tester to LinkRunner Manager:
1
Install the latest version of LinkRunner Manager
software on your PC. Start the software.
2
Turn on the tester.
3
Use the USB cable supplied with the tester to connect
the tester to the PC.
4
To see the profiles that are on the tester, select Tools >
Profile Manager from the LinkRunner Manager tool
bar. Profile names display under the LinkRunner Profile
Files pane.
5
Highlight a profile in this pane and select Transfer
from LinkRunner.
6
When you are done editing the profile, highlight it and
select Transfer to LinkRunner.
Set Language
To change the language displayed in all screens
1
Select Tools > Set Language.
2
Highlight a language and press Save.
Using AutoTest, Switch, and Cable Test
Using AutoTest
AutoTest can test up to ten targets. These targets can be
local or off-net targets (devices). You can enter the IP
address or a DNS name. If you specify a target address
without specifying a port number, AutoTest will perform an
ICMP Ping to the target address. If you specify a port
number, AutoTest will perform a TCP Connectivity test (SYN/
ACK). See figures 14 and 15.
Select Tools > AutoTest Configuration and enter the
target address(s). Entering a port number is optional.
AutoTest will attempt to Ping/Connect to the target device
three times. If Continuous is selected, the test will run until
you exit the AutoTest screen.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke networks LinkRunner AT 1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke networks LinkRunner AT 1000 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info