624068
16
Zoom out
Zoom in
Previous page
1/36
Next page
LinkRunner AT 1000/2000 Network Auto-Tester
Users Manual
8
Common Questions LR-AT Can Solve
First connect an RJ-45 or fiber cable (2000 model only) from
the network hub or wall plate to the LinkRunner AT RJ-45
LAN or fiber port. Check the following list of questions and
associated answers to see how LinkRunner AT can help you
get the job done.
Common Questions
Q > Is this a good RJ45 Ethernet cable?
A > Use Cable testing and the built in wiremap for patch
cables, or an external Wireview
TM
Office Locator.
Q > Am I receiving a good fiber signal?
A > Connect to your network via a SFP adapter and
validate the signal strength and link in the Switch
screen.
Q >Where does this RJ45 cable go?
A >Use the Cable test toner function, Switch > Flash
Port function, or Switch discovery protocol.
Q > Is this cable hooked up to anything?
A > Select Switch to identify an open cable, an active
link, an un-powered network device or telephone
voltage.
Q > Does this RJ45 drop support PoE?
A > Use Tools to specify the desired PoE power class and
use Switch or AutoTest to verify the power under load
up to 25.5W (802.3at).
Q > What speed/duplex is this device configured for?
A > Use Switch to check the advertised and actual
speed/duplex. Additionally, use Tools to tests for manual
(non-Auto Negotiated) speed/duplex.
Q > Can I see traffic from this connection?
A > Observe the utilization LED blinking to see network
traffic.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke networks LinkRunner AT 1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke networks LinkRunner AT 1000 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info